# Cutting kaizen foam with tool model

**URL:** <https://discourse.shapr3d.com/t/cutting-kaizen-foam-with-tool-model/27526>\
**Category:** Modeling Questions\
**Created:** [August 25, 2023, 10:26am UTC](https://discourse.shapr3d.com/t/cutting-kaizen-foam-with-tool-model/27526 "2023-08-25T10:26:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![khernatify](https://avatars.discourse-cdn.com/v4/letter/k/c77e96/32.png) [@khernatify](https://discourse.shapr3d.com/u/khernatify)\
**Post date:** [August 25, 2023, 10:26am UTC](https://discourse.shapr3d.com/t/cutting-kaizen-foam-with-tool-model/27526/1 "2023-08-25T10:26:23Z")

</div>

Can someone help or direct me to existing topic if present please, I need to “sink” tool model into the body, can’t project or subtract as recess needs to be deeper than tool, also need to remove middle of the ring end of the spanner.  
I would really appreciate any help.  
Thanks

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/7/3/738251b0e5518136431a84021171ade6e2aa54ee.jpeg)

---

<div class="post-metadata">

**Author:** ![Daniel\_Horvath](https://avatars.discourse-cdn.com/v4/letter/d/977dab/32.png) [@Daniel\_Horvath](https://discourse.shapr3d.com/u/Daniel_Horvath)\
**Post date:** [August 25, 2023, 11:16am UTC](https://discourse.shapr3d.com/t/cutting-kaizen-foam-with-tool-model/27526/2 "2023-08-25T11:16:00Z")

</div>

Hey @khernatify,  
Here is a possible solution, I used Project tool to project the outlines, then Offset edge to make clearance: [Loom | Free Screen & Video Recording Software | Loom](https://www.loom.com/share/84f33ddaebc343db9172dbaf811b46f9?sid=2d8c0dbc-c378-4150-aac1-6295035df588)

---

<div class="post-metadata">

**Author:** ![khernatify](https://avatars.discourse-cdn.com/v4/letter/k/c77e96/32.png) [@khernatify](https://discourse.shapr3d.com/u/khernatify)\
**Post date:** [August 25, 2023, 12:14pm UTC](https://discourse.shapr3d.com/t/cutting-kaizen-foam-with-tool-model/27526/3 "2023-08-25T12:14:46Z")

</div>

Awesome, I was trying to project whole model and that obviously wasn’t happening, thanks.