# Dimensions left on **URL:** \ **Category:** Modeling Questions\ **Created:** [August 27, 2020, 7:36pm UTC](https://discourse.shapr3d.com/t/dimensions-left-on/8791 "2020-08-27T19:36:44Z")\ **Posts on this page:** 1\ **Showing post:** 5

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\ **Post date:** [August 28, 2020, 6:38am UTC](https://discourse.shapr3d.com/t/dimensions-left-on/8791/5 "2020-08-28T06:38:55Z")

Hi @Edward89 Welcome to the Forum. It depends what you want, and if you want it now you will have to use a method that is available. But it is not true to say it cannot be done within S3D. Note that to save time not all possible Dimensions have been included. Set up 3 instances of the same Body so that all appropriate Faces can be **Tools \> Project** ed onto a Plane. If necessary make a Plane available by Tapping on an appropriate Face and then use **Add \> Construction Plane** \> choosing the Option **Offset** and then drag the Arrow to a suitable distance to position the CP. Open **Items** and Select ALL of the Bodies needed from the List then use **Project** and in this case this is the result: ![IMG_2474](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f7366ebbfa855fe97b989e4957fcc6e95e9ff109.jpeg) Something similar can be done using the Bodies. Note that in the following: ALL the needed Faces have been aligned onto the SAME Plane. Some of the Lines used to generate the Dimension have been ‘Hidden’ by drawing them directly on the Edges of a Body. The Lines that remain visible are purely to demonstrate functionality: ![IMG_2561](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/45d1567655471311fcc1ea96cde257c2ee9a406a.jpeg) ![IMG_2560](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/924a8f64bab7031a7697b25cf3c29f20e9f8a8ed.jpeg) Happy S3Ding --- _[View the full topic](https://discourse.shapr3d.com/t/dimensions-left-on/8791)._