# Dimensions not being updated on M1 iPad

**URL:** <https://discourse.shapr3d.com/t/dimensions-not-being-updated-on-m1-ipad/13503>\
**Category:** Modeling Questions\
**Created:** [June 24, 2021, 10:42pm UTC](https://discourse.shapr3d.com/t/dimensions-not-being-updated-on-m1-ipad/13503 "2021-06-24T22:42:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![UCS308](https://avatars.discourse-cdn.com/v4/letter/u/7ab992/32.png) [@UCS308](https://discourse.shapr3d.com/u/UCS308)\
**Post date:** [June 24, 2021, 10:42pm UTC](https://discourse.shapr3d.com/t/dimensions-not-being-updated-on-m1-ipad/13503/1 "2021-06-24T22:42:28Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c898b2b26b207fe254fac7d16b4757d460af5f3b.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/42ecec75fd6a9859f0c6f93efdbbdbf71044aabb.jpeg)

I have a model that I have been working on for some time. The bottom portion of the leg is a 50x50x262mm long rectangle. One end has an 87 degree bevel on it. When I updated the size by moving the beveled face. The dimension does not change. The piece changes size but the dimension is not getting updated. I closed Shapr, reopened it and the dimension was correct.

I tried it again, and moved the face by an amount I entered, and the piece changed size, but the dimension did not get updated… oddly the short edge has a value greater than the long edge. Only thing new is I just switched to an M1 based iPad.

Is this a known problem?

---

<div class="post-metadata">

**Author:** ![JRRYAN](https://avatars.discourse-cdn.com/v4/letter/j/848f3c/32.png) [@JRRYAN](https://discourse.shapr3d.com/u/JRRYAN)\
**Post date:** [June 25, 2021, 11:45am UTC](https://discourse.shapr3d.com/t/dimensions-not-being-updated-on-m1-ipad/13503/2 "2021-06-25T11:45:43Z")

</div>

I just reported this same bug! [Bug report - iPad - edge measurements in 3D select](https://discourse.shapr3d.com/t/bug-report-ipad-edge-measurements-in-3d-select/13511)

It seems to update the min distance if you select the terminal edges of the shape, but not the distance ruler of the singly selected edge on its own. I think there’s more going on with it than just not updating the dim as well. It seems to pick dims at random sometimes.