# Disable whatever this is **URL:** \ **Category:** Modeling Questions\ **Created:** [June 1, 2025, 8:56pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209 "2025-06-01T20:56:56Z")\ **Posts on this page:** 11\ **Page:** 4

**Author:** ![BKE](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/bke/32/37531_2.png) [@BKE](https://discourse.shapr3d.com/u/BKE)\ **Post date:** [June 9, 2025, 10:34pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/62 "2025-06-09T22:34:59Z")

> [@Signpainter](#): > > Fair enough — I’m just waving the _drapeau rouge_ when Shapr decides to go all _cirque du clic_ on me. > > If your workflow is running like a fine-tuned _Citroën_, I’m genuinely happy for you. > > Meanwhile, some of us are stuck in a UI version of _Les Misérables_ — one pop-up at a time 🫠 > > C’est la UI… ou peut-être juste _Shapr c’est la vie_. II must say… you made my day! LOL! Thnx!!! All good! (My father had a standing reference to the back spiral brake pipes of Citroën, what _not_ to do. But no one can denie the existence of the Eiffel Tower or Concorde - RIP) 10-4 ---

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\ **Post date:** [June 9, 2025, 11:10pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/63 "2025-06-09T23:10:17Z")

Officially declared myself a UX Designer 7 hours ago! 🤣 ---

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\ **Post date:** [June 9, 2025, 11:40pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/64 "2025-06-09T23:40:52Z")

> [@SCALEMODEL](#): > > Maybe I want to apply fillet to both edges! just like when exporting the file, we use the multiple check mark, then we can press a done. But I think the developers will fix it so that it is better than its current state. By the way, I’m curious what possibilities the new ipados26 has for S3D.. ---

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\ **Post date:** [June 10, 2025, 12:08pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/65 "2025-06-10T12:08:28Z")

> [@JST](#): > > just like when exporting the file, we use the multiple check mark, then we can press a done. Actually that was the point I was making, are you suggesting you want to select multiple edges at the same time? So that would be a CHECK button or a RADIO for only 1 selection. Multiple selection can be useful? hmmm 🤔 Also export is not a check but a Star button, quick favorites. 🤓 ---

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\ **Post date:** [June 10, 2025, 4:20pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/66 "2025-06-10T16:20:14Z")

> [@SCALEMODEL](#): > > Actually that was the point I was making, are you suggesting you want to select multiple edges at the same time? So that would be a CHECK button or a RADIO for only 1 selection. 👍 > [@SCALEMODEL](#): > > Also export is not a check but a Star button, quick favorites. From the favorites you shuold check..after that moment you can use the share button or export.. ![IMG_1968](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/a/9a1263e82c08f2be636d57fb5128d8ed162739d5.jpeg) ---

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\ **Post date:** [June 10, 2025, 4:54pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/67 "2025-06-10T16:54:18Z")

> [@JST](#): > > From the favorites you shuold check..after that moment you can use the share button or export.. 🫠 I have Stars! ![stars.PNG](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/9/19f6596e665f93f0f5ab2b27017d2ffcfca508cf.jpeg) ---

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\ **Post date:** [June 10, 2025, 4:59pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/68 "2025-06-10T16:59:25Z")

There is the select button 🙃 ---

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\ **Post date:** [June 10, 2025, 5:01pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/69 "2025-06-10T17:01:52Z")

You are correct, 🤯 ---

**Author:** ![ryleylamarsh](https://avatars.discourse-cdn.com/v4/letter/r/e19adc/32.png) [@ryleylamarsh](https://discourse.shapr3d.com/u/ryleylamarsh)\ **Post date:** [June 16, 2025, 2:44am UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/70 "2025-06-16T02:44:41Z")

Hate it. I have been using shapr for a few years now and this has to be the most jarring and poorly implemented feature I have seen so far. It’s a “you’ve got to be kidding me” moment. Please fix ---

**Author:** ![Signpainter](https://avatars.discourse-cdn.com/v4/letter/s/47e85d/32.png) [@Signpainter](https://discourse.shapr3d.com/u/Signpainter)\ **Post date:** [July 1, 2025, 9:40pm UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/71 "2025-07-01T21:40:47Z")

Looks like this feature has been disabled in the latest release. yay! 😃 ---

**Author:** ![Dayton3D](https://avatars.discourse-cdn.com/v4/letter/d/7bcc69/32.png) [@Dayton3D](https://discourse.shapr3d.com/u/Dayton3D)\ **Post date:** [July 2, 2025, 4:12am UTC](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209/72 "2025-07-02T04:12:04Z")

Thank God, what a disaster that was.I can see how it would be useful in certain situations, but not when I have a single symmetrical body. It killed development time. [Previous page](https://discourse.shapr3d.com/t/disable-whatever-this-is/38209.md?page=3)