# Drill hole with included angle

**URL:** <https://discourse.shapr3d.com/t/drill-hole-with-included-angle/23656>\
**Category:** Modeling Questions\
**Created:** [January 19, 2023, 12:08pm UTC](https://discourse.shapr3d.com/t/drill-hole-with-included-angle/23656 "2023-01-19T12:08:35Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [January 19, 2023, 6:06pm UTC](https://discourse.shapr3d.com/t/drill-hole-with-included-angle/23656/3 "2023-01-19T18:06:27Z")

</div>

This sounds like something I was inquiring about before.

edit: This request was made prior to the 2-distance chamfer addition, but as @Matt_the-Rathje points out, this requires calculating the two dimensions to achieve the angle.

> [@Chamfer Angles](https://discourse.shapr3d.com/t/chamfer-angles/10895):
>
> Currently, the chamfer tool only specifies depth, but not angle. Default angle is 45 degrees, but it would be nice to change that angle, or even set a default. So possibly, when you select an edge to chamfer, you would have the double arrow for the chamfer depth, and a curved double arrow for chamfer angle, much like the extrude tool. Is this something that could easily be implemented?

---

_[View the full topic](https://discourse.shapr3d.com/t/drill-hole-with-included-angle/23656)._