# Embed or emboss a logo into shaper

**URL:** <https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031>\
**Category:** Modeling Questions\
**Created:** [September 16, 2020, 7:14pm UTC](https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031 "2020-09-16T19:14:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![krazykanuckjr](https://avatars.discourse-cdn.com/v4/letter/k/7ba0ec/32.png) [@krazykanuckjr](https://discourse.shapr3d.com/u/krazykanuckjr)\
**Post date:** [September 16, 2020, 7:14pm UTC](https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031/1 "2020-09-16T19:14:44Z")

</div>

Hey there fellow designers / makers im looking for some guidance and help? Is there any tool or process where i can upload a logo image into Shaper3D to then emboss or embed it into my part? I’m familiar with the Solidworks process from illustrator. Thanks for the help in advance.

---

<div class="post-metadata">

**Author:** ![JasonJessica](https://avatars.discourse-cdn.com/v4/letter/j/dc4da7/32.png) [@JasonJessica](https://discourse.shapr3d.com/u/JasonJessica)\
**Post date:** [September 16, 2020, 7:22pm UTC](https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031/2 "2020-09-16T19:22:08Z")

</div>

@krazykanuckjr Currently there is not a native way of doing this. It may be possible but certainly not in an automatic way like other modeling packages.

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [September 16, 2020, 7:57pm UTC](https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031/3 "2020-09-16T19:57:19Z")

</div>

Hi @krazykanuckjr Welcome to the Forum.

Is this what you are looking for:

[https://discourse.shapr3d.com/t/flat-to-round/6081/2](https://discourse.shapr3d.com/t/flat-to-round/6081/2)

[![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9523754912ed44362a5a428dff63fa53252dc444.jpeg) ](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9523754912ed44362a5a428dff63fa53252dc444.jpeg)

Obviously different effects will result dependent on the Body being Projected to, and relative to size and shape compared to the Logo.

Happy S3Ding.

---

<div class="post-metadata">

**Author:** ![krazykanuckjr](https://avatars.discourse-cdn.com/v4/letter/k/7ba0ec/32.png) [@krazykanuckjr](https://discourse.shapr3d.com/u/krazykanuckjr)\
**Post date:** [September 16, 2020, 8:29pm UTC](https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031/4 "2020-09-16T20:29:51Z")

</div>

Im pretty sure that tool will help especially with a curved surface. will use that next time today i simply spelt out the company in sketched blocks than extruded it all. May the modelling be with you.

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [September 16, 2020, 8:43pm UTC](https://discourse.shapr3d.com/t/embed-or-emboss-a-logo-into-shaper/9031/5 "2020-09-16T20:43:42Z")

</div>

@krazykanuckjr  
If it gets you moving in the right direction it is a start, if you experiment you will likely get the result you want. Hope we can look forward to seeing your Designs.