# Engagement!

**URL:** <https://discourse.shapr3d.com/t/engagement/30240>\
**Category:** Share your creations\
**Created:** [February 8, 2024, 2:59pm UTC](https://discourse.shapr3d.com/t/engagement/30240 "2024-02-08T14:59:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andyb](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@Andyb](https://discourse.shapr3d.com/u/Andyb)\
**Post date:** [February 8, 2024, 2:59pm UTC](https://discourse.shapr3d.com/t/engagement/30240/1 "2024-02-08T14:59:58Z")

</div>

Having proposed I’m now entering the minefield of ring purchase. To increase my understanding, decided it best to mock one up on S3d.

 ![IMG_1359](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/5/65ea79b4d5b3dd2fc970fb895ff2e34ad9343471.jpeg)  
 ![IMG_1358](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/f/1/f1af4b7cc42fee40f99193612010162635281b16.jpeg)

---

<div class="post-metadata">

**Author:** ![Meg](https://avatars.discourse-cdn.com/v4/letter/m/35a633/32.png) [@Meg](https://discourse.shapr3d.com/u/Meg)\
**Post date:** [February 9, 2024, 4:27pm UTC](https://discourse.shapr3d.com/t/engagement/30240/2 "2024-02-09T16:27:04Z")

</div>

Hi Andy!  
This is really cool. And with some small adjustments that could be casted and set.  
I use shapr for my ring designs all the time and if you have any questions on how to make the design useable for jewelers, I can help.

---

<div class="post-metadata">

**Author:** ![Andyb](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@Andyb](https://discourse.shapr3d.com/u/Andyb)\
**Post date:** [February 13, 2024, 12:20pm UTC](https://discourse.shapr3d.com/t/engagement/30240/3 "2024-02-13T12:20:49Z")

</div>

Hi Meg

Kind of you to offer, thank you.

It hadn’t occurred to me to get the ring manufactured - Initially just wished to have a greater understanding of diamond cutting and got a bit carried away.

At some point I must have a go at getting a design into physical form, how much of a leap is it.

Regards

Andy