# Extrude drafted

**URL:** <https://discourse.shapr3d.com/t/extrude-drafted/10555>\
**Category:** Modeling Questions\
**Created:** [December 28, 2020, 3:29pm UTC](https://discourse.shapr3d.com/t/extrude-drafted/10555 "2020-12-28T15:29:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [December 28, 2020, 3:29pm UTC](https://discourse.shapr3d.com/t/extrude-drafted/10555/1 "2020-12-28T15:29:31Z")

</div>

A problem with extrusion is drafted by default

It would help a lot if shapr3d team disconnect each action from another

Because I suspect this happened due using scale tool.

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/00effe64b2ea914652794d0a0523a171a30ebdc4.MP4](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/00effe64b2ea914652794d0a0523a171a30ebdc4.MP4)

---

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [December 28, 2020, 3:45pm UTC](https://discourse.shapr3d.com/t/extrude-drafted/10555/2 "2020-12-28T15:45:33Z")

</div>

Hi @MrJack88, that looks weird! Can it happen, that the sketch plane is not perfectly perpendicular to the desired direction of your extrusion? By default, all extrusions are done perpendicular to the drawing plane of the base curve that was extruded - without any draft for sure. What is the result if you do the extrude as a _New Body_?  
Can you please send me the workspace to let me take a look at it?

---

<div class="post-metadata">

**Author:** ![MrJack88](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mrjack88/32/8138_2.png) [@MrJack88](https://discourse.shapr3d.com/u/MrJack88)\
**Post date:** [December 28, 2020, 3:56pm UTC](https://discourse.shapr3d.com/t/extrude-drafted/10555/3 "2020-12-28T15:56:50Z")

</div>

Ops 🙃  
My bad 😅  
Thanks 😃

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/a/a11987cf8774d8a9a82665701e160e43a5a61005.png)

---

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [December 29, 2020, 1:07pm UTC](https://discourse.shapr3d.com/t/extrude-drafted/10555/4 "2020-12-29T13:07:44Z")

</div>

no worries 😃