# Extrude sketch with multiple lines

**URL:** <https://discourse.shapr3d.com/t/extrude-sketch-with-multiple-lines/4231>\
**Category:** Modeling Questions\
**Created:** [March 4, 2019, 5:57pm UTC](https://discourse.shapr3d.com/t/extrude-sketch-with-multiple-lines/4231 "2019-03-04T17:57:45Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://discourse.shapr3d.com/u/Larry)\
**Post date:** [March 4, 2019, 5:57pm UTC](https://discourse.shapr3d.com/t/extrude-sketch-with-multiple-lines/4231/1 "2019-03-04T17:57:45Z")

</div>

i’m trying to extrude two forms from the same sketch but when i pull the first shape, the part of the sketch adjacent to that becomes un-selectable. alternatively, i tried to select and pull both, and then push a section back, but that doesnt work either.

i have a video that i will post

---

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://discourse.shapr3d.com/u/Larry)\
**Post date:** [March 4, 2019, 6:00pm UTC](https://discourse.shapr3d.com/t/extrude-sketch-with-multiple-lines/4231/2 "2019-03-04T18:00:18Z")

</div>

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c8c2f94c41bbabe361858ee762c399dcb41e4567.MP4](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c8c2f94c41bbabe361858ee762c399dcb41e4567.MP4)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [March 4, 2019, 6:14pm UTC](https://discourse.shapr3d.com/t/extrude-sketch-with-multiple-lines/4231/3 "2019-03-04T18:14:08Z")

</div>

Unfortunately this comes from an intended behaviour, that we hide sketch fillings over holes automatically. If you hide the extruded body from the groups menu, the filling will reappear.

---

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://discourse.shapr3d.com/u/Larry)\
**Post date:** [March 6, 2019, 2:41am UTC](https://discourse.shapr3d.com/t/extrude-sketch-with-multiple-lines/4231/4 "2019-03-06T02:41:20Z")

</div>

ok, thanks istvan.