# Extrude to match?

**URL:** <https://discourse.shapr3d.com/t/extrude-to-match/3089>\
**Category:** Modeling Questions\
**Created:** [October 26, 2018, 2:34am UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089 "2018-10-26T02:34:56Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hatfield2000](https://avatars.discourse-cdn.com/v4/letter/h/ecb155/32.png) [@Hatfield2000](https://discourse.shapr3d.com/u/Hatfield2000)\
**Post date:** [October 26, 2018, 2:34am UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/1 "2018-10-26T02:34:56Z")

</div>

I’m new to Shapr, and I’ve gotten hung up on trying to Extrude a box to match the height of another box.

When I pull up the face, I try to snap to a vertex on the other box and can’t. I’ve tried using the Extrude tool and get the same results. Can’t snap to a face, line, nor point.

What am I doing wrong? Is this not a feature?

Thanks!

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [October 26, 2018, 7:20am UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/2 "2018-10-26T07:20:28Z")

</div>

This is something that we are currently working on 🙂

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [October 1, 2019, 8:33pm UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/3 "2019-10-01T20:33:45Z")

</div>

Then I noticed the date!

---

<div class="post-metadata">

**Author:** ![GREGM](https://avatars.discourse-cdn.com/v4/letter/g/bc79bd/32.png) [@GREGM](https://discourse.shapr3d.com/u/GREGM)\
**Post date:** [May 10, 2023, 3:20pm UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/4 "2023-05-10T15:20:18Z")

</div>

Hi Istvan, Has this feature been implemented yet? It would be super helpful.

---

<div class="post-metadata">

**Author:** ![welshsteve](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/welshsteve/32/16111_2.png) [@welshsteve](https://discourse.shapr3d.com/u/welshsteve)\
**Post date:** [May 10, 2023, 5:08pm UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/5 "2023-05-10T17:08:49Z")

</div>

‘Replace Face’ will achieve the desired result…

[](https://www.youtube.com/watch?v=Og28TMZsBO4)

---

<div class="post-metadata">

**Author:** ![GREGM](https://avatars.discourse-cdn.com/v4/letter/g/bc79bd/32.png) [@GREGM](https://discourse.shapr3d.com/u/GREGM)\
**Post date:** [May 11, 2023, 5:34pm UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/6 "2023-05-11T17:34:03Z")

</div>

Thanks! Should have known that!

---

<div class="post-metadata">

**Author:** ![welshsteve](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/welshsteve/32/16111_2.png) [@welshsteve](https://discourse.shapr3d.com/u/welshsteve)\
**Post date:** [May 11, 2023, 6:48pm UTC](https://discourse.shapr3d.com/t/extrude-to-match/3089/7 "2023-05-11T18:48:19Z")

</div>

You’re welcome 🙂