# Extruded problem

**URL:** <https://discourse.shapr3d.com/t/extruded-problem/398>\
**Category:** Modeling Questions\
**Created:** [August 31, 2016, 10:31am UTC](https://discourse.shapr3d.com/t/extruded-problem/398 "2016-08-31T10:31:13Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Abdullashameya](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@Abdullashameya](https://discourse.shapr3d.com/u/Abdullashameya)\
**Post date:** [August 31, 2016, 10:31am UTC](https://discourse.shapr3d.com/t/extruded-problem/398/1 "2016-08-31T10:31:13Z")

</div>

Hello guys, I already use a free version but i can’t extruded any face , it’s that problem because I use a free version?! , pls gave me some help

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [August 31, 2016, 10:33am UTC](https://discourse.shapr3d.com/t/extruded-problem/398/2 "2016-08-31T10:33:18Z")

</div>

You have to press and drag with the Apple Pencil. Are you using an Apple Pencil?

---

<div class="post-metadata">

**Author:** ![Abdullashameya](https://avatars.discourse-cdn.com/v4/letter/a/96bed5/32.png) [@Abdullashameya](https://discourse.shapr3d.com/u/Abdullashameya)\
**Post date:** [August 31, 2016, 10:37am UTC](https://discourse.shapr3d.com/t/extruded-problem/398/3 "2016-08-31T10:37:09Z")

</div>

Yes I used it , when the pen touch the screen it’s don’t make anything only draws line

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [August 31, 2016, 10:49am UTC](https://discourse.shapr3d.com/t/extruded-problem/398/4 "2016-08-31T10:49:25Z")

</div>

Press and drag. Apply force on the pencil. You can test the required force in the tutorial.

---

<div class="post-metadata">

**Author:** ![Tamas\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tamas_shapr3d/32/41_2.png) [@Tamas\_Shapr3D](https://discourse.shapr3d.com/u/Tamas_Shapr3D)\
**Post date:** [August 31, 2016, 10:50am UTC](https://discourse.shapr3d.com/t/extruded-problem/398/5 "2016-08-31T10:50:28Z")

</div>

Hi, press the pencil until you hear a clicking sound and a yellow bidirectional arrow appears. If you find that the needed pressure is too much, you can change it to a lower setting in the menu in the bottom right corner.

---

<div class="post-metadata">

**Author:** ![Apixel1234](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/apixel1234/32/336_2.png) [@Apixel1234](https://discourse.shapr3d.com/u/Apixel1234)\
**Post date:** [August 31, 2016, 4:10pm UTC](https://discourse.shapr3d.com/t/extruded-problem/398/6 "2016-08-31T16:10:40Z")

</div>

I’m going to chime in here because as a newbie used to other software I had similar issues. You can only extrude when you see the “yellow” auto fill on an outline or you are selecting the face of a solid. You might need to change your plane until you see this. I was used to software that would extrude perpendicular to ANY outline and for the longest time could not get extrusions on shapr3d.