# Feature request: setting an angle for extrusion/inclusion

**URL:** <https://discourse.shapr3d.com/t/feature-request-setting-an-angle-for-extrusion-inclusion/16832>\
**Category:** Modeling Questions\
**Created:** [January 11, 2022, 7:57pm UTC](https://discourse.shapr3d.com/t/feature-request-setting-an-angle-for-extrusion-inclusion/16832 "2022-01-11T19:57:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![siris](https://avatars.discourse-cdn.com/v4/letter/s/ecccb3/32.png) [@siris](https://discourse.shapr3d.com/u/siris)\
**Post date:** [January 11, 2022, 7:57pm UTC](https://discourse.shapr3d.com/t/feature-request-setting-an-angle-for-extrusion-inclusion/16832/1 "2022-01-11T19:57:17Z")

</div>

I’m finding that the extrusion feature only runs parallel with the plane being effected. So, if you’re doing a compound taper, you can apply a second angle to an existing angled plane. If there was a control for the degree of extrusion, facets -for example - would be easier to cut.

Also, subtractive measurements - in addition to cumulative measurements would be a great aid in the efficiency of fitting contoured pieces into existing designs.

Lastly - the controls need to show where you touch the object vs the middle or you can’t see your precise fit.

🙏🙏🙏

---

<div class="post-metadata">

**Author:** ![Nelis](https://avatars.discourse-cdn.com/v4/letter/n/74df32/32.png) [@Nelis](https://discourse.shapr3d.com/u/Nelis)\
**Post date:** [January 23, 2024, 4:09pm UTC](https://discourse.shapr3d.com/t/feature-request-setting-an-angle-for-extrusion-inclusion/16832/2 "2024-01-23T16:09:34Z")

</div>

I’m in need of the same function. If I’m on an angled plane and want to extrude in another direction than the normal.  
I’m now forced to use a work around, like a loft or move/rotate the resulting structure to its required orientation, which is quite inconvenient.  
Has this been ever officially considered as a request?  
Thanks