# Feedback needed: arcs

**URL:** <https://discourse.shapr3d.com/t/feedback-needed-arcs/804>\
**Category:** Modeling Questions\
**Created:** [March 1, 2017, 12:09pm UTC](https://discourse.shapr3d.com/t/feedback-needed-arcs/804 "2017-03-01T12:09:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [March 1, 2017, 12:09pm UTC](https://discourse.shapr3d.com/t/feedback-needed-arcs/804/1 "2017-03-01T12:09:37Z")

</div>

We want to change the representation of arcs from the current start-mid-end point to start-end-center. The latter representation is rather common in the CAD world, and would solve a lot of problems.  
What do you think? Any feedback is much appreciated.

---

<div class="post-metadata">

**Author:** ![VVM](https://avatars.discourse-cdn.com/v4/letter/v/7993a0/32.png) [@VVM](https://discourse.shapr3d.com/u/VVM)\
**Post date:** [March 4, 2017, 10:52pm UTC](https://discourse.shapr3d.com/t/feedback-needed-arcs/804/2 "2017-03-04T22:52:59Z")

</div>

I think that the start-mid-end is a unique feature which comes handy in creating arcs and adjusting them in areas where normally would take much more work to create with start-end-centre approach. I sure would not want to loose this unique and flexible feature. Thank you

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [March 5, 2017, 7:27pm UTC](https://discourse.shapr3d.com/t/feedback-needed-arcs/804/3 "2017-03-05T19:27:56Z")

</div>

Maybe we should have both?

---

<div class="post-metadata">

**Author:** ![VVM](https://avatars.discourse-cdn.com/v4/letter/v/7993a0/32.png) [@VVM](https://discourse.shapr3d.com/u/VVM)\
**Post date:** [March 5, 2017, 8:29pm UTC](https://discourse.shapr3d.com/t/feedback-needed-arcs/804/4 "2017-03-05T20:29:06Z")

</div>

Sounds great! Thank you.  
Victor