# Fill?
**URL:** https://discourse.shapr3d.com/t/fill/27873
**Category:** Modeling Questions
**Created:** [September 12, 2023, 8:48am UTC](https://discourse.shapr3d.com/t/fill/27873 "2023-09-12T08:48:23Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@MartinM](https://discourse.shapr3d.com/u/MartinM)
#### Post date: [September 12, 2023, 8:48am UTC](https://discourse.shapr3d.com/t/fill/27873/1 "2023-09-12T08:48:23Z")
Is there a fill option?
Like in this picture, with a selected edge, is it possible to fill/insert a face.
---
### Author:  [@Cjacob](https://discourse.shapr3d.com/u/Cjacob)
#### Post date: [September 12, 2023, 12:53pm UTC](https://discourse.shapr3d.com/t/fill/27873/2 "2023-09-12T12:53:58Z")
Hello MartinM,
Yes. Many options. Depends on what you want to accomplish.
Fill the “hole”? Select the i.d. and then type in and or pull the dimension you want.
or
Select face, add/sketch a circle, then extrude to fill the “hole”.
Or you can subtract a insert from the body.
---
### Author:  [@danno11](https://discourse.shapr3d.com/u/danno11)
#### Post date: [September 12, 2023, 2:03pm UTC](https://discourse.shapr3d.com/t/fill/27873/3 "2023-09-12T14:03:50Z")
you can just pick the inner surface of the hole and pick delete it will fill it in solid.
---
### Author:  [@MartinM](https://discourse.shapr3d.com/u/MartinM)
#### Post date: [September 12, 2023, 6:18pm UTC](https://discourse.shapr3d.com/t/fill/27873/4 "2023-09-12T18:18:58Z")
If I draw a new circle it disappears?
---
### Author:  [@Stephen](https://discourse.shapr3d.com/u/Stephen)
#### Post date: [September 12, 2023, 7:19pm UTC](https://discourse.shapr3d.com/t/fill/27873/5 "2023-09-12T19:19:39Z")
I’m not sure what you are asking. If you just want to make a filler circle to fit into an end of the hole, one quick way is to extrude a new body from it and close the hole in new body before moving it into the original.
---
### Author:  [@MartinM](https://discourse.shapr3d.com/u/MartinM)
#### Post date: [September 13, 2023, 8:29am UTC](https://discourse.shapr3d.com/t/fill/27873/6 "2023-09-13T08:29:37Z")
I used designspark before Shapr3D
This video shows what I’m missing
[https://youtu.be/ChjuBdRCVd4](https://youtu.be/ChjuBdRCVd4)
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [September 13, 2023, 3:39pm UTC](https://discourse.shapr3d.com/t/fill/27873/7 "2023-09-13T15:39:15Z")
Is this what you’re trying to do?
---
### Author:  [@Cjacob](https://discourse.shapr3d.com/u/Cjacob)
#### Post date: [September 13, 2023, 9:53pm UTC](https://discourse.shapr3d.com/t/fill/27873/8 "2023-09-13T21:53:23Z")
Hello MartinM & TigerMike,
Not sure if related, but on the attached, I discovered the subtract tool won’t work with the attached configuration. Trying to remove the two 3" holes from the gooseneck body.
Any tricks or work arounds would be appreciated.
[Gooseneck\_Subtract Issue.step](https://discourse.shapr3d.com/uploads/short-url/uGSMn3lBb5EfkJtWf20baZHs9ul.step) (72.7 KB)
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [September 13, 2023, 10:08pm UTC](https://discourse.shapr3d.com/t/fill/27873/9 "2023-09-13T22:08:06Z")
One hole was already removed.
[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/f/2fa56e4d343c9b20fa48aac7ad9149a172ad882b.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/f/2fa56e4d343c9b20fa48aac7ad9149a172ad882b.mov)
---
### Author:  [@Cjacob](https://discourse.shapr3d.com/u/Cjacob)
#### Post date: [September 14, 2023, 6:43am UTC](https://discourse.shapr3d.com/t/fill/27873/10 "2023-09-14T06:43:11Z")
Thank you TigerMike,
The other hole still won’t subtract, and the first hole isn’t a “through hole” for some reason. Any ideas on what I’m doing wrong here?
Thank you.
[Subtract Buggy.step](https://discourse.shapr3d.com/uploads/short-url/4qM6rWArhiZwMK7a74yf6GsXOBU.step) (108.8 KB)
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [September 14, 2023, 3:37pm UTC](https://discourse.shapr3d.com/t/fill/27873/11 "2023-09-14T15:37:13Z")
[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/1/e19b210899ffc815aeda92100f6e61b8a20f13f4.mov](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/1/e19b210899ffc815aeda92100f6e61b8a20f13f4.mov)