# Fillet function for 2d

**URL:** <https://discourse.shapr3d.com/t/fillet-function-for-2d/5375>\
**Category:** Modeling Questions\
**Created:** [August 14, 2019, 3:08am UTC](https://discourse.shapr3d.com/t/fillet-function-for-2d/5375 "2019-08-14T03:08:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lea](https://avatars.discourse-cdn.com/v4/letter/l/bc8723/32.png) [@Lea](https://discourse.shapr3d.com/u/Lea)\
**Post date:** [August 14, 2019, 3:08am UTC](https://discourse.shapr3d.com/t/fillet-function-for-2d/5375/1 "2019-08-14T03:08:52Z")

</div>

Hi shapr3d!  
The functions for 3D are great! I like using it on iPad. Unfortunately most of my works are related to 2d. Can fillet function work on 2d interface?

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [August 14, 2019, 7:00am UTC](https://discourse.shapr3d.com/t/fillet-function-for-2d/5375/2 "2019-08-14T07:00:56Z")

</div>

S3D is super accurate and it is easy to ‘shape’ corners using the tools available in Sketch.  
E.g., Place a Circle in a corner of a Rectangle and use Trim to remove unwanted portions of the lines.  
The 3D Functions do not have any effect in 2D Sketches.

---

<div class="post-metadata">

**Author:** ![Lea](https://avatars.discourse-cdn.com/v4/letter/l/bc8723/32.png) [@Lea](https://discourse.shapr3d.com/u/Lea)\
**Post date:** [August 15, 2019, 8:34am UTC](https://discourse.shapr3d.com/t/fillet-function-for-2d/5375/3 "2019-08-15T08:34:00Z")

</div>

I see. Thank you!

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [August 15, 2019, 10:01am UTC](https://discourse.shapr3d.com/t/fillet-function-for-2d/5375/4 "2019-08-15T10:01:02Z")

</div>

You are very welcome.  
If you have not already done so, you may find the tutorials useful?  
In the top left menu click on:

![Help](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/7/7ccaa3d416e0bb66d32c4c38a7dd9f6a591dd7c5.png)