# fillet weld

**URL:** <https://discourse.shapr3d.com/t/fillet-weld/9022>\
**Category:** Modeling Questions\
**Created:** [September 16, 2020, 4:09am UTC](https://discourse.shapr3d.com/t/fillet-weld/9022 "2020-09-16T04:09:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![VGconsilio](https://avatars.discourse-cdn.com/v4/letter/v/ec9cab/32.png) [@VGconsilio](https://discourse.shapr3d.com/u/VGconsilio)\
**Post date:** [September 16, 2020, 4:09am UTC](https://discourse.shapr3d.com/t/fillet-weld/9022/1 "2020-09-16T04:09:49Z")

</div>

How to draw fillet weld? Thanks.

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [September 16, 2020, 5:52am UTC](https://discourse.shapr3d.com/t/fillet-weld/9022/2 "2020-09-16T05:52:45Z")

</div>

Hi @VGconsilio Welcome to the Forum  
This may help. The Fillet/Chamfer Tool creates either depending on the direction of movement:

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c11f5c3fd6692c5e2184867d493a9b34e1494615.mp4](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c11f5c3fd6692c5e2184867d493a9b34e1494615.mp4)

This may also be helpful:

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f6857c85b0cb382ad0120c43b6370312592d3eb2.mp4](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f6857c85b0cb382ad0120c43b6370312592d3eb2.mp4)

Happy S3Ding

---

<div class="post-metadata">

**Author:** ![VGconsilio](https://avatars.discourse-cdn.com/v4/letter/v/ec9cab/32.png) [@VGconsilio](https://discourse.shapr3d.com/u/VGconsilio)\
**Post date:** [September 16, 2020, 6:17am UTC](https://discourse.shapr3d.com/t/fillet-weld/9022/3 "2020-09-16T06:17:23Z")

</div>

Thank you very much for your answer

---

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [September 16, 2020, 1:24pm UTC](https://discourse.shapr3d.com/t/fillet-weld/9022/4 "2020-09-16T13:24:27Z")

</div>

@VGconsilio  
You are most welcome.