# Fillets and Chamfers

**URL:** <https://discourse.shapr3d.com/t/fillets-and-chamfers/11160>\
**Category:** Modeling Questions\
**Created:** [January 29, 2021, 11:46am UTC](https://discourse.shapr3d.com/t/fillets-and-chamfers/11160 "2021-01-29T11:46:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kando](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kando](https://discourse.shapr3d.com/u/Kando)\
**Post date:** [January 29, 2021, 11:46am UTC](https://discourse.shapr3d.com/t/fillets-and-chamfers/11160/1 "2021-01-29T11:46:18Z")

</div>

I’m really enjoying modeling on Shapr3D after 3 days of using it. However, I’d like to request a useful command on your fillets and chamfers. Can the software team please look into adding the ability to include variable fillets, ellipse fillets. Also, variable chamfers would be nice to have also.  
Thanks

---

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [February 3, 2021, 6:11pm UTC](https://discourse.shapr3d.com/t/fillets-and-chamfers/11160/2 "2021-02-03T18:11:07Z")

</div>

I requested a similar option for the use case of hole chamfers, specifically.

> [@Chamfer Angles](https://discourse.shapr3d.com/t/chamfer-angles/10895):
>
> Currently, the chamfer tool only specifies depth, but not angle. Default angle is 45 degrees, but it would be nice to change that angle, or even set a default. So possibly, when you select an edge to chamfer, you would have the double arrow for the chamfer depth, and a curved double arrow for chamfer angle, much like the extrude tool. Is this something that could easily be implemented?