# Finishing Organic Shapes

**URL:** <https://discourse.shapr3d.com/t/finishing-organic-shapes/39889>\
**Category:** Modeling Questions\
**Created:** [December 1, 2025, 5:30pm UTC](https://discourse.shapr3d.com/t/finishing-organic-shapes/39889 "2025-12-01T17:30:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Luis](https://avatars.discourse-cdn.com/v4/letter/l/3e96dc/32.png) [@Luis](https://discourse.shapr3d.com/u/Luis)\
**Post date:** [December 1, 2025, 5:30pm UTC](https://discourse.shapr3d.com/t/finishing-organic-shapes/39889/1 "2025-12-01T17:30:16Z")

</div>

Hello I am trying to finish off the shape for this loft so that it finishes off organically. I am getting the sense it is not possible within shapr3d but I was wondering if someone had a solution. All I have anywhere is to keep creating infinite profiles for to loft into and then using the chamber tool. Any other options?

 ![IMG_0255](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/6/4/642a301691d8f72bd0911ddb2211720072a37c90.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [December 1, 2025, 6:27pm UTC](https://discourse.shapr3d.com/t/finishing-organic-shapes/39889/2 "2025-12-01T18:27:39Z")

</div>

One way is to use loft.

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [December 2, 2025, 6:21am UTC](https://discourse.shapr3d.com/t/finishing-organic-shapes/39889/3 "2025-12-02T06:21:54Z")

</div>

If it is an end of the wing(winglet or tip) you can use a very small profile on the end for the last section.

Here is my fin with an older version S3D:

[![](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/9/29f93e46fb63a4c191a3e3cdbd56430aefefa507.jpeg "Fin with loft 2 in Shapr3D") ](https://www.youtube.com/watch?v=295MapU279k)