# First attempts with Shapr

**URL:** https://discourse.shapr3d.com/t/first-attempts-with-shapr/17234
**Category:** Share your creations
**Created:** [February 5, 2022, 2:01pm UTC](https://discourse.shapr3d.com/t/first-attempts-with-shapr/17234 "2022-02-05T14:01:44Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Stephen](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stephen/32/16350_2.png) [@Stephen](https://discourse.shapr3d.com/u/Stephen)
#### Post date: [February 5, 2022, 2:01pm UTC](https://discourse.shapr3d.com/t/first-attempts-with-shapr/17234/1 "2022-02-05T14:01:45Z")

</div>

I’ve been playing with Shapr for about three weeks now, following tutorials and winging it. I’ve been using ZBrush for years but never did any CAD work so this is all new to me and I’m enjoying it so far.

Here is an attempt at wheels and a hammer, all done from sketches I found on the web. Also I did the motor tutorial. I loaded them into Cadmio and here are the screenshots. I much prefer Keyshot for rendering my ZBrush work, butt Cadmio is okay for quick visualisations.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/4f426e50b95e079d6affc35c44312bd07b522ede.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f7c846b305066e1e138a8533433b4a5fcf235e87.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/c/c9364e093e8dbb0b6205ebb51e082914c38869b1.jpeg)

---

<div class="post-metadata">

### Author: ![Stephen](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stephen/32/16350_2.png) [@Stephen](https://discourse.shapr3d.com/u/Stephen)
#### Post date: [February 5, 2022, 2:03pm UTC](https://discourse.shapr3d.com/t/first-attempts-with-shapr/17234/2 "2022-02-05T14:03:49Z")

</div>

Here’s the motor from the Shapr tutorial.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/a/a8d833114b63c777023cb0a6e05ebee6c09c247c.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/d/d6eb4d77992d2e778f30b668047fdecb0a479a44.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/d/d75807454491215e2893d908de82899f4ced1735.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/7/74820dadbab0ab2341318c08e8dfb27049f8692f.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/6/6210443773ee5fc4bbddafc80587c81d15b51872.jpeg)

---

<div class="post-metadata">

### Author: ![udokr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/udokr/32/14506_2.png) [@udokr](https://discourse.shapr3d.com/u/udokr)
#### Post date: [February 5, 2022, 2:20pm UTC](https://discourse.shapr3d.com/t/first-attempts-with-shapr/17234/3 "2022-02-05T14:20:52Z")

</div>

Nice work, the hammer looks very realistic! 👍