# Flat to round

**URL:** <https://discourse.shapr3d.com/t/flat-to-round/6081>\
**Category:** Modeling Questions\
**Created:** [November 21, 2019, 9:02pm UTC](https://discourse.shapr3d.com/t/flat-to-round/6081 "2019-11-21T21:02:28Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Gelphyn](https://avatars.discourse-cdn.com/v4/letter/g/db5fbb/32.png) [@Gelphyn](https://discourse.shapr3d.com/u/Gelphyn)\
**Post date:** [November 21, 2019, 10:33pm UTC](https://discourse.shapr3d.com/t/flat-to-round/6081/2 "2019-11-21T22:33:30Z")

</div>

@Dragoon6  
This is a Flat Sketch ‘A’:

1. Tools \> Project onto a Cylinder with the Lefthand ‘A’

2. The Projected ‘A’ was Selected and pushed into the Cylinder using the Double Arrow Tool

3. The ‘A’ was Extruded only [5mm deep]

4. The ‘A’ was Extruded into the Cylinder [7mm deep]

 ![IMG_0837](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/9523754912ed44362a5a428dff63fa53252dc444.jpeg)

If this is not helpful please describe more fully what you wish to do.

---

_[View the full topic](https://discourse.shapr3d.com/t/flat-to-round/6081)._