# Freeze on the latest iPad pro

**URL:** <https://discourse.shapr3d.com/t/freeze-on-the-latest-ipad-pro/5377>\
**Category:** Modeling Questions\
**Created:** [August 14, 2019, 3:21pm UTC](https://discourse.shapr3d.com/t/freeze-on-the-latest-ipad-pro/5377 "2019-08-14T15:21:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![maximum](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@maximum](https://discourse.shapr3d.com/u/maximum)\
**Post date:** [August 14, 2019, 3:21pm UTC](https://discourse.shapr3d.com/t/freeze-on-the-latest-ipad-pro/5377/1 "2019-08-14T15:21:02Z")

</div>

Hi, i’m New user, recently bought latest iPad Pro for engineering work, and faced freezing on simple manipulations:  
[Video](https://photos.app.goo.gl/VBV4vsmUSAssBdAR6)  
Try 2 different internet providers with good internet - nothing changed

Is any way to fix this? Otherwise it’s impossible to work with Shapr3D

---

<div class="post-metadata">

**Author:** ![DanielR](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielr/32/582_2.png) [@DanielR](https://discourse.shapr3d.com/u/DanielR)\
**Post date:** [August 14, 2019, 3:32pm UTC](https://discourse.shapr3d.com/t/freeze-on-the-latest-ipad-pro/5377/2 "2019-08-14T15:32:33Z")

</div>

Hi - thanks for the question. Shapr3D doesn’t require internet connection to work with, it runs natively on your iPad.

The problem is with the workspace - we will be changing it in future releases - thanks for your understanding.

---

<div class="post-metadata">

**Author:** ![maximum](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@maximum](https://discourse.shapr3d.com/u/maximum)\
**Post date:** [August 14, 2019, 3:46pm UTC](https://discourse.shapr3d.com/t/freeze-on-the-latest-ipad-pro/5377/3 "2019-08-14T15:46:55Z")

</div>

Thanks for fast answering!  
any ideas when this behavior could be fixed?

---

<div class="post-metadata">

**Author:** ![DanielR](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielr/32/582_2.png) [@DanielR](https://discourse.shapr3d.com/u/DanielR)\
**Post date:** [August 14, 2019, 3:50pm UTC](https://discourse.shapr3d.com/t/freeze-on-the-latest-ipad-pro/5377/4 "2019-08-14T15:50:11Z")

</div>

It is only for those cylinder - if you adjust the “yellow” parts you will notice that you can adjust every detail.

As for the when: We are releasing 3.20 tomorrow, and we will make sure this gets out fast right after 3.20 - can’t share an exact date