# From rendering to reality!, non-functional part but learning the workflows to produce real world items

**URL:** <https://discourse.shapr3d.com/t/from-rendering-to-reality-non-functional-part-but-learning-the-workflows-to-produce-real-world-items/27049>\
**Category:** Share your creations\
**Created:** [July 29, 2023, 5:39am UTC](https://discourse.shapr3d.com/t/from-rendering-to-reality-non-functional-part-but-learning-the-workflows-to-produce-real-world-items/27049 "2023-07-29T05:39:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stitchwurx](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stitchwurx/32/21610_2.png) [@Stitchwurx](https://discourse.shapr3d.com/u/Stitchwurx)\
**Post date:** [July 29, 2023, 5:39am UTC](https://discourse.shapr3d.com/t/from-rendering-to-reality-non-functional-part-but-learning-the-workflows-to-produce-real-world-items/27049/1 "2023-07-29T05:39:22Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/4/1/41dbd0f0d70c847db3b9ca0d3479d7f46eb6e7ff.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/3/53a04b6936ea4891fc0bf8b7c8f6b0577f2e406e.jpeg)

---

<div class="post-metadata">

**Author:** ![jb7](https://avatars.discourse-cdn.com/v4/letter/j/e5b9ba/32.png) [@jb7](https://discourse.shapr3d.com/u/jb7)\
**Post date:** [July 29, 2023, 4:25pm UTC](https://discourse.shapr3d.com/t/from-rendering-to-reality-non-functional-part-but-learning-the-workflows-to-produce-real-world-items/27049/2 "2023-07-29T16:25:46Z")

</div>

Very nice looking print- are you using bumpy skin or something? Any post-processing tips?

---

<div class="post-metadata">

**Author:** ![Stitchwurx](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/stitchwurx/32/21610_2.png) [@Stitchwurx](https://discourse.shapr3d.com/u/Stitchwurx)\
**Post date:** [July 30, 2023, 7:45am UTC](https://discourse.shapr3d.com/t/from-rendering-to-reality-non-functional-part-but-learning-the-workflows-to-produce-real-world-items/27049/3 "2023-07-30T07:45:40Z")

</div>

Printed in ABS then sanded parts out 180 & 220.  
Primed with SEM high build primer then spray painted with SEM trim black, held the can back quite aways away (dry spray) to give it light texture