# Geometric Pattern Diamond

**URL:** <https://discourse.shapr3d.com/t/geometric-pattern-diamond/35959>\
**Category:** Modeling Questions\
**Created:** [January 8, 2025, 4:15pm UTC](https://discourse.shapr3d.com/t/geometric-pattern-diamond/35959 "2025-01-08T16:15:40Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![SCALEMODEL](https://avatars.discourse-cdn.com/v4/letter/s/77aa72/32.png) [@SCALEMODEL](https://discourse.shapr3d.com/u/SCALEMODEL)\
**Post date:** [January 8, 2025, 7:04pm UTC](https://discourse.shapr3d.com/t/geometric-pattern-diamond/35959/2 "2025-01-08T19:04:27Z")

</div>

Something similar was tried here

> [@Draw folded paper lamp](https://discourse.shapr3d.com/t/draw-folded-paper-lamp/35136/9):
>
> I found this post while trying some various lamp shades designs. I realized the easiest way is to create these 2 sided roof and rotate/align them.

Tried it again with your example, use polygon tool as a guide, and sketch the folds so you can loft them.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/d/5d5c21564056f0c6b2b760e7f66d7f2069dcee90.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/c/5cfcd105c6dc3b969e4c1a6f4a6c155b3c9da934.jpeg)

Mirror

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/7/d78269b5d15beb3fe20aa8759648499c87230984.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/c/0cb14cfbacbf445c525b8fe566cb3d399c634655.jpeg)

---

_[View the full topic](https://discourse.shapr3d.com/t/geometric-pattern-diamond/35959)._