# Help needed

**URL:** https://discourse.shapr3d.com/t/help-needed/14449
**Category:** Modeling Questions
**Created:** [August 17, 2021, 9:39am UTC](https://discourse.shapr3d.com/t/help-needed/14449 "2021-08-17T09:39:28Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![Jonas](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonas](https://discourse.shapr3d.com/u/Jonas)
#### Post date: [August 17, 2021, 9:39am UTC](https://discourse.shapr3d.com/t/help-needed/14449/1 "2021-08-17T09:39:28Z")

</div>

How do i make the corner pieces same hight at the edges the slope upto the middle

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/8/8f35a012914aa39a44d441ca842a7c1d442c675a.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/be0cf0e305f2511029fea3f0146340f954a7a80b.jpeg)

---

<div class="post-metadata">

### Author: ![Jonas](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonas](https://discourse.shapr3d.com/u/Jonas)
#### Post date: [August 17, 2021, 9:41am UTC](https://discourse.shapr3d.com/t/help-needed/14449/2 "2021-08-17T09:41:16Z")

</div>

It is ment to be a top on a fence pole

---

<div class="post-metadata">

### Author: ![milouchien](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/milouchien/32/10020_2.png) [@milouchien](https://discourse.shapr3d.com/u/milouchien)
#### Post date: [August 17, 2021, 10:00am UTC](https://discourse.shapr3d.com/t/help-needed/14449/3 "2021-08-17T10:00:59Z")

</div>

Are you trying to copy the pyramid shape in the background?  
If not can you explain a bit more?

---

<div class="post-metadata">

### Author: ![Jonas](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonas](https://discourse.shapr3d.com/u/Jonas)
#### Post date: [August 17, 2021, 10:25am UTC](https://discourse.shapr3d.com/t/help-needed/14449/4 "2021-08-17T10:25:11Z")

</div>

I am trying to make it like the pyramid in the background but with the corners camferd also.  
so it will be like if you look from above it will look like 8 faced piece.

Hope you understood

---

<div class="post-metadata">

### Author: ![Jonas](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonas](https://discourse.shapr3d.com/u/Jonas)
#### Post date: [August 17, 2021, 10:26am UTC](https://discourse.shapr3d.com/t/help-needed/14449/5 "2021-08-17T10:26:55Z")

</div>

![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/24be9d5f23197d5ee46ffced3525ff607e6758d7.jpeg)  
 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/fd1c3793a20f969339332582571158d9f05a0632.jpeg)  
Closest i got so far

---

<div class="post-metadata">

### Author: ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [August 17, 2021, 2:07pm UTC](https://discourse.shapr3d.com/t/help-needed/14449/6 "2021-08-17T14:07:49Z")

</div>

Use the **Replace Face** tool.

---

<div class="post-metadata">

### Author: ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)
#### Post date: [August 17, 2021, 3:46pm UTC](https://discourse.shapr3d.com/t/help-needed/14449/7 "2021-08-17T15:46:08Z")

</div>

The replace face tool will tilt it from one reference face to the other. Even if the face is split into two pieces by a projected edge 😕  
Please see one, _not that clean_ solution below using the replace face first. Then an edge should be projected and the remaining cross-section can be swept along another edge. Just to subtract the swept body from the corner piece.