# Help with angled extrusions

**URL:** <https://discourse.shapr3d.com/t/help-with-angled-extrusions/17229>\
**Category:** Modeling Questions\
**Created:** [February 5, 2022, 3:19am UTC](https://discourse.shapr3d.com/t/help-with-angled-extrusions/17229 "2022-02-05T03:19:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cyclical](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@Cyclical](https://discourse.shapr3d.com/u/Cyclical)\
**Post date:** [February 5, 2022, 3:19am UTC](https://discourse.shapr3d.com/t/help-with-angled-extrusions/17229/1 "2022-02-05T03:19:58Z")

</div>

Hey there,

I’m looking for some help at how to connect the upright pieces on an angle to the Center circle. I cannot figure out how to do it for the life of me. Any help would be greatly appreciated.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/b6cf71888224b9ac1eb02aca53992bf385ebf2dd.jpeg)

---

<div class="post-metadata">

**Author:** ![SM1](https://avatars.discourse-cdn.com/v4/letter/s/9de0a6/32.png) [@SM1](https://discourse.shapr3d.com/u/SM1)\
**Post date:** [February 5, 2022, 4:03am UTC](https://discourse.shapr3d.com/t/help-with-angled-extrusions/17229/2 "2022-02-05T04:03:27Z")

</div>

Make sure that the extrusions are new bodies when you extrude them.  
You can then double tap them and rotate them as you wish.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/4c8cb5b6934cb07b2b084fd26fc53d6eb9d19cfd.jpeg)

I would suggest moving the center of the object to the bottom and rotating it from there like this:

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/a/ae285e1588d1d902c9a919487011169e8adbfcc4.jpeg)

---

<div class="post-metadata">

**Author:** ![Cyclical](https://avatars.discourse-cdn.com/v4/letter/c/96bed5/32.png) [@Cyclical](https://discourse.shapr3d.com/u/Cyclical)\
**Post date:** [February 5, 2022, 4:03pm UTC](https://discourse.shapr3d.com/t/help-with-angled-extrusions/17229/3 "2022-02-05T16:03:30Z")

</div>

Thats exactly what I was looking for, thank you!