# Help with rail and loft

**URL:** <https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297>\
**Category:** Modeling Questions\
**Created:** [June 3, 2024, 9:45pm UTC](https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297 "2024-06-03T21:45:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dysaniaprops](https://avatars.discourse-cdn.com/v4/letter/d/3d9bf3/32.png) [@Dysaniaprops](https://discourse.shapr3d.com/u/Dysaniaprops)\
**Post date:** [June 3, 2024, 9:45pm UTC](https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297/1 "2024-06-03T21:45:58Z")

</div>

Im currently having issues with the tip of the moon. I used loft but it ends up looking odd where the new and old loft connect. Im not sure how to go about that part besides rails and loft. Any tips re appreciated !

 ![IMG_1255](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/f/5fed8263d1f2c89a6b2ff9c9bb2bcb13ee6c4574.jpeg)

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [June 4, 2024, 4:54am UTC](https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297/2 "2024-06-04T04:54:31Z")

</div>

At the tip section make more cross section, draw a very little circle at the peak of the tip.  
Use the loft tool then fillet.

Here was an article with similar case:

> [@Loft Tool to follow a curved line](https://discourse.shapr3d.com/t/loft-tool-to-follow-a-curved-line/30056):
>
> Hello All, I would like to draw the design below. I have read several articles on the forum related to this, but I am unable to create this shape. Using the Loft Tool creates a nice gradient from A to C, but it logically goes in a straight line. I understand that it is also possible to generate a non-straight line between A and C (in the shape of the hook), but then this line must be connected to the perimeter of A and C. In my design, this is als…