# Help with rail and loft

**URL:** <https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297>\
**Category:** Modeling Questions\
**Created:** [June 3, 2024, 9:45pm UTC](https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297 "2024-06-03T21:45:58Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [June 4, 2024, 4:54am UTC](https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297/2 "2024-06-04T04:54:31Z")

</div>

At the tip section make more cross section, draw a very little circle at the peak of the tip.  
Use the loft tool then fillet.

Here was an article with similar case:

> [@Loft Tool to follow a curved line](https://discourse.shapr3d.com/t/loft-tool-to-follow-a-curved-line/30056):
>
> Hello All, I would like to draw the design below. I have read several articles on the forum related to this, but I am unable to create this shape. Using the Loft Tool creates a nice gradient from A to C, but it logically goes in a straight line. I understand that it is also possible to generate a non-straight line between A and C (in the shape of the hook), but then this line must be connected to the perimeter of A and C. In my design, this is als…

---

_[View the full topic](https://discourse.shapr3d.com/t/help-with-rail-and-loft/32297)._