# Holes

**URL:** <https://discourse.shapr3d.com/t/holes/661>\
**Category:** Modeling Questions\
**Created:** [December 29, 2016, 3:59pm UTC](https://discourse.shapr3d.com/t/holes/661 "2016-12-29T15:59:15Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 3:59pm UTC](https://discourse.shapr3d.com/t/holes/661/1 "2016-12-29T15:59:15Z")

</div>

I cannot make the last 4 holes 😢  
The first 4 holes was no problem but on the other side it’s seems like it is impossible…

Best regards,  
Robert

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/cd535da6ba8748ecadadcb82a5accec5056a6ff2.PNG)

[vinkel 01.stp](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/08932eb07b90f3a0432d293cf4fae936f1619032.stp) (380.1 KB)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 29, 2016, 4:00pm UTC](https://discourse.shapr3d.com/t/holes/661/2 "2016-12-29T16:00:24Z")

</div>

What happens when you try to make them?

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 4:09pm UTC](https://discourse.shapr3d.com/t/holes/661/3 "2016-12-29T16:09:19Z")

</div>

It’s hard to explain on English (I’m from Sweden) but i uploaded a step file if you want to try 🙂️  
/Rob

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 4:19pm UTC](https://discourse.shapr3d.com/t/holes/661/4 "2016-12-29T16:19:01Z")

</div>

I’m just playing around with the app, so it’s not a big problem 😀

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 29, 2016, 4:20pm UTC](https://discourse.shapr3d.com/t/holes/661/5 "2016-12-29T16:20:18Z")

</div>

Can you post a video?

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 4:24pm UTC](https://discourse.shapr3d.com/t/holes/661/6 "2016-12-29T16:24:26Z")

</div>

I don’t know how to make a video, sorry😥

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 29, 2016, 4:24pm UTC](https://discourse.shapr3d.com/t/holes/661/7 "2016-12-29T16:24:58Z")

</div>

Using your phone is fine 🙂

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 4:44pm UTC](https://discourse.shapr3d.com/t/holes/661/8 "2016-12-29T16:44:00Z")

</div>

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/dca196235892ae3f9af45e59413d660d0e589190.PNG)Uploading…  
Trying to upload a video, but this message is popping up! its a .mov file  
I think it is a standard video format for a iPhone

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 29, 2016, 5:23pm UTC](https://discourse.shapr3d.com/t/holes/661/9 "2016-12-29T17:23:42Z")

</div>

I changed the permissions, try it now.

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 5:59pm UTC](https://discourse.shapr3d.com/t/holes/661/10 "2016-12-29T17:59:18Z")

</div>

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/1X/dd07a69603d2a44a6c1517deaa60780ccae1b862.PNG)

[https://www.dropbox.com/s/zral1facd0n371o/Fil%202016-12-29%2018%2051%2017.mov?dl=0](https://www.dropbox.com/s/zral1facd0n371o/Fil%202016-12-29%2018%2051%2017.mov?dl=0)

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 6:01pm UTC](https://discourse.shapr3d.com/t/holes/661/11 "2016-12-29T18:01:13Z")

</div>

I sent a link to the Dropbox instead 🙂

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 7:08pm UTC](https://discourse.shapr3d.com/t/holes/661/13 "2016-12-29T19:08:30Z")

</div>

[https://www.dropbox.com/s/g053xcxg04ds97f/Fil%202016-12-29%2019%2055%2019.mov?dl=0](https://www.dropbox.com/s/g053xcxg04ds97f/Fil%202016-12-29%2019%2055%2019.mov?dl=0)

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 29, 2016, 9:02pm UTC](https://discourse.shapr3d.com/t/holes/661/14 "2016-12-29T21:02:29Z")

</div>

Interesting, can you use the boolean subtract tool to subtract it?

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 9:53pm UTC](https://discourse.shapr3d.com/t/holes/661/15 "2016-12-29T21:53:29Z")

</div>

Nope, I was trying that also. (In one of the videos above)  
I think that I didn’t do it in right order, perhaps I shouldn’t have done the holes before i did the union (merge) of the parts…  
Pardon my spelling 😓 😂

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 9:57pm UTC](https://discourse.shapr3d.com/t/holes/661/16 "2016-12-29T21:57:53Z")

</div>

[vinkel 01.stp](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/1X/08932eb07b90f3a0432d293cf4fae936f1619032.stp) (380.1 KB)

If you are curious about it i uploaded the file again

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [December 29, 2016, 10:07pm UTC](https://discourse.shapr3d.com/t/holes/661/17 "2016-12-29T22:07:30Z")

</div>

Thanks, we will look into it. You may want to try creating the cylinders elsewhere, and moving them into place, and trying to subtract them after that. Also if you could share the .shapr file that would help.

---

<div class="post-metadata">

**Author:** ![Robert](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/robert/32/1329_2.png) [@Robert](https://discourse.shapr3d.com/u/Robert)\
**Post date:** [December 29, 2016, 11:55pm UTC](https://discourse.shapr3d.com/t/holes/661/18 "2016-12-29T23:55:12Z")

</div>

[vinkel 01.shapr](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/1X/90cc01870d405ae4686b2cfd18812ce7bb22200a.shapr) (1.1 MB)

Did try that but it didn’t work

Love the app by the way 👍🏻