# How can I get chamfers to meet? :(

**URL:** <https://discourse.shapr3d.com/t/how-can-i-get-chamfers-to-meet/17469>\
**Category:** Modeling Questions\
**Created:** [February 16, 2022, 7:36pm UTC](https://discourse.shapr3d.com/t/how-can-i-get-chamfers-to-meet/17469 "2022-02-16T19:36:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarkL](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/markl/32/8140_2.png) [@MarkL](https://discourse.shapr3d.com/u/MarkL)\
**Post date:** [February 16, 2022, 7:36pm UTC](https://discourse.shapr3d.com/t/how-can-i-get-chamfers-to-meet/17469/1 "2022-02-16T19:36:59Z")

</div>

So I’ve had this issue a while and usually somewhat fix it by getting it close… but I can never get chamfers to line up so there is always a weird edge which prevents proper edge flow. Bevel is fine, no issue at all only chamfer. How can I fix this?. Is there a edge constraint to keep it same width as other chamfers when doing at the same time?.

Thx!

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/0cff1af12483d2ac514ec1c9c6e0b03cf86eca2d.jpeg)

---

<div class="post-metadata">

**Author:** ![MarkL](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/markl/32/8140_2.png) [@MarkL](https://discourse.shapr3d.com/u/MarkL)\
**Post date:** [February 16, 2022, 7:39pm UTC](https://discourse.shapr3d.com/t/how-can-i-get-chamfers-to-meet/17469/2 "2022-02-16T19:39:48Z")

</div>

Tried another same issue. Can’t get the chamfer to stop on the corner there is always a gap. If I try to manually get it close it still won’t be perfect and then I can’t bevel because it isn’t snapped

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/7/7d258cd08f78e1661a8f535e58c8ef0d40475e1b.jpeg)

---

<div class="post-metadata">

**Author:** ![MarkL](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/markl/32/8140_2.png) [@MarkL](https://discourse.shapr3d.com/u/MarkL)\
**Post date:** [February 21, 2022, 1:21am UTC](https://discourse.shapr3d.com/t/how-can-i-get-chamfers-to-meet/17469/3 "2022-02-21T01:21:34Z")

</div>

Anyone have ideas?

---

<div class="post-metadata">

**Author:** ![jnygaard.dk](https://avatars.discourse-cdn.com/v4/letter/j/e68b1a/32.png) [@jnygaard.dk](https://discourse.shapr3d.com/u/jnygaard.dk)\
**Post date:** [February 21, 2022, 2:44pm UTC](https://discourse.shapr3d.com/t/how-can-i-get-chamfers-to-meet/17469/4 "2022-02-21T14:44:13Z")

</div>

Can you share your file?? It’s a little hard to see where you’re at…