# How do I lean/angle a wall?

**URL:** <https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830>\
**Category:** Modeling Questions\
**Created:** [August 28, 2018, 9:59pm UTC](https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830 "2018-08-28T21:59:40Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![EVfan](https://avatars.discourse-cdn.com/v4/letter/e/5fc32e/32.png) [@EVfan](https://discourse.shapr3d.com/u/EVfan)\
**Post date:** [August 28, 2018, 9:59pm UTC](https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830/1 "2018-08-28T21:59:40Z")

</div>

I have an object with a floor, and 3 walls. I’m trying to angle the wall or lean it back to 45 degrees. I’ve scoured the tutorials but can figure out this function. Any ideas

---

<div class="post-metadata">

**Author:** ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)\
**Post date:** [August 28, 2018, 10:07pm UTC](https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830/2 "2018-08-28T22:07:53Z")

</div>

Hey @EVfan, can you show an image of what exactly you need?

---

<div class="post-metadata">

**Author:** ![EVfan](https://avatars.discourse-cdn.com/v4/letter/e/5fc32e/32.png) [@EVfan](https://discourse.shapr3d.com/u/EVfan)\
**Post date:** [August 28, 2018, 10:53pm UTC](https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830/3 "2018-08-28T22:53:39Z")

</div>

![IMG_87336C3C3D6D-1](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/e/ea0bc1ef54858cee702698717e6a8eb766fd29b6.jpeg)

I’m trying to make the top of the wall with the slots in it meet inside edge of the rim I created, while the bottom remains in place. Essentially making the top of the box 30" long, and the bottom 20".

---

<div class="post-metadata">

**Author:** ![EVfan](https://avatars.discourse-cdn.com/v4/letter/e/5fc32e/32.png) [@EVfan](https://discourse.shapr3d.com/u/EVfan)\
**Post date:** [August 28, 2018, 11:43pm UTC](https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830/4 "2018-08-28T23:43:21Z")

</div>

![IMG_0562](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/d/deae96fdb591ecc6cb88a76120dbf428ab5fd41e.jpeg)

I’ve got closer, but now need to get rid of all the stuff inside the box, so it’’’ get back to 3 walls and a floor.

---

<div class="post-metadata">

**Author:** ![tommyn](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tommyn/32/1714_2.png) [@tommyn](https://discourse.shapr3d.com/u/tommyn)\
**Post date:** [August 29, 2018, 12:08am UTC](https://discourse.shapr3d.com/t/how-do-i-lean-angle-a-wall/2830/5 "2018-08-29T00:08:28Z")

</div>

You might try drawing it upside down from your depiction and as a full box on the lip which is shelled out and the slots extruded through. Then just rotate the face with the slots to the desired position. Seems like a simpler approach to me. Hope this helps.

Best,

Tommy