# How do i make this two faces meet with an smooth angle

**URL:** <https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273>\
**Category:** Modeling Questions\
**Created:** [July 19, 2026, 6:13pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273 "2026-07-19T18:13:40Z")\
**Posts on this page:** 15\
**Page:** 1

<div class="post-metadata">

**Author:** ![olemartinnanthonsen](https://avatars.discourse-cdn.com/v4/letter/o/e9a140/32.png) [@olemartinnanthonsen](https://discourse.shapr3d.com/u/olemartinnanthonsen)\
**Post date:** [July 19, 2026, 6:13pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/1 "2026-07-19T18:13:40Z")

</div>

```auto
I have a model I’ve created, but I need help figuring out how to make the section that goes between the two blue faces, and I need the angle to be smooth.

```

 ![Skjermbilde 2026-07-19 200913](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/5/b5c6239466c498eeb0a7674941bdd0c3136a66b2.jpeg)

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 19, 2026, 6:16pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/2 "2026-07-19T18:16:26Z")

</div>

Use loft with tangency or with guide rails. Or sweep.

---

<div class="post-metadata">

**Author:** ![olemartinnanthonsen](https://avatars.discourse-cdn.com/v4/letter/o/e9a140/32.png) [@olemartinnanthonsen](https://discourse.shapr3d.com/u/olemartinnanthonsen)\
**Post date:** [July 19, 2026, 6:29pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/3 "2026-07-19T18:29:57Z")

</div>

when i try to do that, i says that the body wouldn`t be valid

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 19, 2026, 6:31pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/4 "2026-07-19T18:31:50Z")

</div>

> [@olemartinnanthonsen](#):
>
> when i try to do that

What exactly?

If you can share the model I will show you how to deal with it.  
I can show you an example, but that doesn’t mean it will work in your case.

---

<div class="post-metadata">

**Author:** ![olemartinnanthonsen](https://avatars.discourse-cdn.com/v4/letter/o/e9a140/32.png) [@olemartinnanthonsen](https://discourse.shapr3d.com/u/olemartinnanthonsen)\
**Post date:** [July 19, 2026, 6:36pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/5 "2026-07-19T18:36:24Z")

</div>

> **[Shapr3D - Project](https://app.shapr3d.com/p/899f27cf-9a1b-4359-89e6-6e44118c39bc)**
>
> Review designs together. View models and add comments directly to your 3D design.

tell me if that works for you

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 19, 2026, 6:37pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/6 "2026-07-19T18:37:04Z")

</div>

> [@olemartinnanthonsen](#):
>
> tell me if that works for you

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/e/1/e169833127cc758b89f92050ae131f8fb34560cf.png)

Don’t forget to give edit access

---

<div class="post-metadata">

**Author:** ![olemartinnanthonsen](https://avatars.discourse-cdn.com/v4/letter/o/e9a140/32.png) [@olemartinnanthonsen](https://discourse.shapr3d.com/u/olemartinnanthonsen)\
**Post date:** [July 19, 2026, 6:42pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/7 "2026-07-19T18:42:09Z")

</div>

now it should work

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 19, 2026, 6:46pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/8 "2026-07-19T18:46:21Z")

</div>



---

<div class="post-metadata">

**Author:** ![olemartinnanthonsen](https://avatars.discourse-cdn.com/v4/letter/o/e9a140/32.png) [@olemartinnanthonsen](https://discourse.shapr3d.com/u/olemartinnanthonsen)\
**Post date:** [July 19, 2026, 6:48pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/9 "2026-07-19T18:48:35Z")

</div>

how did you make that look so easy, make me feel a little stupid

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [July 19, 2026, 6:49pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/10 "2026-07-19T18:49:22Z")

</div>

> [@olemartinnanthonsen](#):
>
> look so easy

Practice.

> [@olemartinnanthonsen](#):
>
> make me feel a little stupid

Sorry 🙂

---

<div class="post-metadata">

**Author:** ![olemartinnanthonsen](https://avatars.discourse-cdn.com/v4/letter/o/e9a140/32.png) [@olemartinnanthonsen](https://discourse.shapr3d.com/u/olemartinnanthonsen)\
**Post date:** [July 19, 2026, 6:50pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/11 "2026-07-19T18:50:03Z")

</div>

need to learn the program a little more

thank you sooooo much

---

<div class="post-metadata">

**Author:** ![jnygaard.dk](https://avatars.discourse-cdn.com/v4/letter/j/e68b1a/32.png) [@jnygaard.dk](https://discourse.shapr3d.com/u/jnygaard.dk)\
**Post date:** [August 8, 2026, 11:42am UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/12 "2026-08-08T11:42:19Z")

</div>

I don’t have access to the file, so I can’t try. But i wonder why you created a new arc (spline)??? There seem to one already… Does it fail using that one???

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [August 8, 2026, 11:45am UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/13 "2026-08-08T11:45:17Z")

</div>

> [@jnygaard.dk](#):
>
> But i wonder why you created a new arc (spline)???

Existing one was in incorrect place. Just didn’t want to correct anything and show how it should be done from the beginning.

---

<div class="post-metadata">

**Author:** ![jnygaard.dk](https://avatars.discourse-cdn.com/v4/letter/j/e68b1a/32.png) [@jnygaard.dk](https://discourse.shapr3d.com/u/jnygaard.dk)\
**Post date:** [September 4, 2026, 2:56pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/14 "2026-09-04T14:56:24Z")

</div>

> [@Xdrakosha](#):
>
> Existing one was in incorrect place

Just so I understand this too: Does it matter if it’s in the middle, outside or even inside?? I would think it does not, as long as the ends is perpendicular to the face. Or am I missing something??

---

<div class="post-metadata">

**Author:** ![Xdrakosha](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/xdrakosha/32/24881_2.png) [@Xdrakosha](https://discourse.shapr3d.com/u/Xdrakosha)\
**Post date:** [September 4, 2026, 5:53pm UTC](https://discourse.shapr3d.com/t/how-do-i-make-this-two-faces-meet-with-an-smooth-angle/41273/15 "2026-09-04T17:53:21Z")

</div>

> [@jnygaard.dk](#):
>
> Does it matter if it’s in the middle

It doesn’t really matter. It was just more convenient for me that way, and I didn’t want to modify the original sketch.