# How to apply different angles

**URL:** <https://discourse.shapr3d.com/t/how-to-apply-different-angles/9990>\
**Category:** Modeling Questions\
**Created:** [November 30, 2020, 9:06pm UTC](https://discourse.shapr3d.com/t/how-to-apply-different-angles/9990 "2020-11-30T21:06:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Christin83](https://avatars.discourse-cdn.com/v4/letter/c/8491ac/32.png) [@Christin83](https://discourse.shapr3d.com/u/Christin83)\
**Post date:** [November 30, 2020, 9:06pm UTC](https://discourse.shapr3d.com/t/how-to-apply-different-angles/9990/1 "2020-11-30T21:06:04Z")

</div>

Dear Shapr3D community,  
I did the basket as recommended and your instructions helped very much. Now I have a new challenge: I want to set in the „basket“ into a straight flat surface.  
But now that the basket has bended shapes the angles are all different around it.

Could you please give me some Tipps on how to construct the flat table where I can set the basket in?

I tried different approaches with sweeping as well but the angles were always different and it didn’t fit.

I hope the picture can describe better my problem

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/b8c21038b3d497f20e1d2e54b6a6320401ed8f9d.jpeg)

Thank you so much in advance for any help

Greetings from Germany

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [November 30, 2020, 11:09pm UTC](https://discourse.shapr3d.com/t/how-to-apply-different-angles/9990/2 "2020-11-30T23:09:57Z")

</div>

Hi there,  
If you are trying to nest the basket in a recess, then this is one way to do it. If not, please explain further what it is you want to achieve.  
-Mike

[/404](https://discourse.shapr3d.com/404)

---

<div class="post-metadata">

**Author:** ![bk1\_7](https://avatars.discourse-cdn.com/v4/letter/b/4af34b/32.png) [@bk1\_7](https://discourse.shapr3d.com/u/bk1_7)\
**Post date:** [December 1, 2020, 9:07am UTC](https://discourse.shapr3d.com/t/how-to-apply-different-angles/9990/3 "2020-12-01T09:07:09Z")

</div>

Hello

Problem solved.thanks for your interest

---

<div class="post-metadata">

**Author:** ![Christin83](https://avatars.discourse-cdn.com/v4/letter/c/8491ac/32.png) [@Christin83](https://discourse.shapr3d.com/u/Christin83)\
**Post date:** [December 1, 2020, 9:52pm UTC](https://discourse.shapr3d.com/t/how-to-apply-different-angles/9990/4 "2020-12-01T21:52:54Z")

</div>

Amazing!!! Thank you so much  
I love this community 😍