# How To Fillet, Bevel or Chamfer Edges on Body?
**URL:** https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634
**Category:** Modeling Questions
**Created:** [December 31, 2023, 12:31pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634 "2023-12-31T12:31:06Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@BenShapr](https://discourse.shapr3d.com/u/BenShapr)
#### Post date: [December 31, 2023, 12:31pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/1 "2023-12-31T12:31:06Z")
How To Fillet, Bevel or Chamfer Edges on Body?
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [December 31, 2023, 2:59pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/2 "2023-12-31T14:59:11Z")
---
### Author:  [@BenShapr](https://discourse.shapr3d.com/u/BenShapr)
#### Post date: [December 31, 2023, 6:26pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/3 "2023-12-31T18:26:12Z")
Thank you so much Mike, appreciate it.
Great help, but I guess I am still missing something substantial here.
For some reason, I can’t get the same result.
I also wanted to delete the inner face, I think that’s the face preventing me from getting a similar result. But from some reason, I can’t delete that large face. The app tells me, I can’t delete, because it would create a hole in the body.
hmmm… not sure what I am missing here.
---
### Author:  [@BenShapr](https://discourse.shapr3d.com/u/BenShapr)
#### Post date: [December 31, 2023, 6:51pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/4 "2023-12-31T18:51:24Z")
and… I am running into the issue, that I can’t delete one face.
Not sure why, and how I could change that, so I could delete the face or the edges to create just a straight line, and to remove that edge / bump.
---
### Author:  [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)
#### Post date: [December 31, 2023, 10:12pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/5 "2023-12-31T22:12:32Z")
You cannot delete a face. Here’s two ways to get rid of that middle face. First, you need to remove the radii at the inner corners. At the very end I made the entire new face parallel with the outside face.
---
### Author:  [@BenShapr](https://discourse.shapr3d.com/u/BenShapr)
#### Post date: [January 1, 2024, 6:33am UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/6 "2024-01-01T06:33:16Z")
wow, Mike… thank you so much and Happy New Year.
This was super helpful. Coming from Polygonal Modeling, this is quite different.
But thanks to your short video, that explains… this was a lightbulb moment for me!
Thank you sooooo much!!!
---
### Author:  [@BenShapr](https://discourse.shapr3d.com/u/BenShapr)
#### Post date: [January 1, 2024, 6:44am UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/7 "2024-01-01T06:44:05Z")
But heck, in this case… I want to remove this tiny edge, but for some reason, I can’t.
---
### Author:  [@BenShapr](https://discourse.shapr3d.com/u/BenShapr)
#### Post date: [January 1, 2024, 6:46am UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/8 "2024-01-01T06:46:40Z")
hmmm… still no chance to resolve that edge… not sure why it’s behaving that way. I can’t get a clean bevel, that one corner causes issues.
---
### Author:  [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)
#### Post date: [January 1, 2024, 2:37pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-bevel-or-chamfer-edges-on-body/29634/9 "2024-01-01T14:37:16Z")
Ben, try **Replace Face**. Tap on the face you want to change (#1 below), then the face you want to replace it with, #2, then hit the Replace Face command.
