# How to fillet rectangle line

**URL:** <https://discourse.shapr3d.com/t/how-to-fillet-rectangle-line/20705>\
**Category:** Modeling Questions\
**Created:** [August 2, 2022, 2:04pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-rectangle-line/20705 "2022-08-02T14:04:39Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mkrlks](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mkrlks](https://discourse.shapr3d.com/u/mkrlks)\
**Post date:** [August 2, 2022, 2:04pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-rectangle-line/20705/1 "2022-08-02T14:04:39Z")

</div>

Hi! how can I fillet line rectangle easily? I want to make 10R coner  
Should I trim after moving circle to the edge?

 ![20220802_230343](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/1/9177858ebae7082ca2b74b52f6f47fade88f10bf.png)

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://discourse.shapr3d.com/u/TheBum)\
**Post date:** [August 2, 2022, 9:12pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-rectangle-line/20705/3 "2022-08-02T21:12:41Z")

</div>

Typically, when you’re modeling solids, the quickest way is to extrude the rectangle and then do the fillet on the solid.

---

<div class="post-metadata">

**Author:** ![McD](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mcd/32/15504_2.png) [@McD](https://discourse.shapr3d.com/u/McD)\
**Post date:** [August 2, 2022, 9:48pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-rectangle-line/20705/5 "2022-08-02T21:48:37Z")

</div>

Yet, we are using Shapr3D because “all the other CAD programs” are inadequate…,

---

<div class="post-metadata">

**Author:** ![mikeschn](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mikeschn/32/10254_2.png) [@mikeschn](https://discourse.shapr3d.com/u/mikeschn)\
**Post date:** [August 2, 2022, 10:20pm UTC](https://discourse.shapr3d.com/t/how-to-fillet-rectangle-line/20705/7 "2022-08-02T22:20:07Z")

</div>

You have more control over fillets on the modeling side than you do on the sketching side.

Check out these fillets:

> **[How do I fillet edges?](https://support.shapr3d.com/hc/en-us/articles/4412424753298-How-do-I-fillet-edges-)**
>
> ℹ️ This tool is available to all users. 
> Using the Chamfer/Fillet tool, you can create two different types of fillets: basic and circular. The basic fillet is a simple, curved transition between ad...