# How to make tangential corners?

**URL:** <https://discourse.shapr3d.com/t/how-to-make-tangential-corners/32887>\
**Category:** Modeling Questions\
**Created:** [July 15, 2024, 1:53pm UTC](https://discourse.shapr3d.com/t/how-to-make-tangential-corners/32887 "2024-07-15T13:53:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![liamalbrti](https://avatars.discourse-cdn.com/v4/letter/l/ed655f/32.png) [@liamalbrti](https://discourse.shapr3d.com/u/liamalbrti)\
**Post date:** [July 15, 2024, 1:53pm UTC](https://discourse.shapr3d.com/t/how-to-make-tangential-corners/32887/1 "2024-07-15T13:53:18Z")

</div>

Hi,

How can you create tangential corners as seen in the photo I’ve attached?

Best regards.

![1](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/3/7/37fa33bb9c088fa556bbaf21fdd479826804fc8c.jpeg)

---

<div class="post-metadata">

**Author:** ![martinchou](https://avatars.discourse-cdn.com/v4/letter/m/e9a140/32.png) [@martinchou](https://discourse.shapr3d.com/u/martinchou)\
**Post date:** [July 15, 2024, 2:16pm UTC](https://discourse.shapr3d.com/t/how-to-make-tangential-corners/32887/2 "2024-07-15T14:16:36Z")

</div>

[shapr3d\_export\_2024-07-15\_22h15m.shapr](https://discourse.shapr3d.com/uploads/short-url/xYtyGpKrTnz5PxJzvLPfyih5zI9.shapr) (18.8 KB)

 ![IMG_1710](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/2/b246e0b0420868ee29823ef261d9d067583fa1c8.jpeg)

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [July 15, 2024, 2:25pm UTC](https://discourse.shapr3d.com/t/how-to-make-tangential-corners/32887/3 "2024-07-15T14:25:00Z")

</div>

Here’s another way using **Subtract**.  
I think @martinchou’s method of using **Intersect** is better.