# How would you approach this design?

**URL:** <https://discourse.shapr3d.com/t/how-would-you-approach-this-design/24631>\
**Category:** Modeling Questions\
**Created:** [March 8, 2023, 9:51am UTC](https://discourse.shapr3d.com/t/how-would-you-approach-this-design/24631 "2023-03-08T09:51:49Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![m4rk](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/m4rk/32/19107_2.png) [@m4rk](https://discourse.shapr3d.com/u/m4rk)\
**Post date:** [March 8, 2023, 5:23pm UTC](https://discourse.shapr3d.com/t/how-would-you-approach-this-design/24631/4 "2023-03-08T17:23:56Z")

</div>

Many thanks for the input @Oregonerd. Funnily enough I’ve been working with image imports since the beginning…

 ![Inside Shapr](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/b/8b9e9f7745927ecc50c27817b3e9e0aeb07d7221.jpeg)

…I guess my question is more about 3d design process versus the actual hole. The hole is just for context. Here’s another image that might help you see it better though:

 ![Hole top view](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/b/bb2a6cd46aed2ec8faaa1c93667fc4568018abbd.jpeg)

Thanks for the tips with 3d printing too, I’ll take a look at those! 🙏 (incidentally, my test prints have been at a vastly reduced infill than I would use for the end product. I’m also printing PLA, whereas I’ll use PETG for the final item).

---

_[View the full topic](https://discourse.shapr3d.com/t/how-would-you-approach-this-design/24631)._