# I can’t get everything to line up

**URL:** https://discourse.shapr3d.com/t/i-can-t-get-everything-to-line-up/8019
**Category:** Modeling Questions
**Created:** [June 17, 2020, 8:06am UTC](https://discourse.shapr3d.com/t/i-can-t-get-everything-to-line-up/8019 "2020-06-17T08:06:49Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Lukegxi](https://avatars.discourse-cdn.com/v4/letter/l/ac8455/32.png) [@Lukegxi](https://discourse.shapr3d.com/u/Lukegxi)
#### Post date: [June 17, 2020, 8:06am UTC](https://discourse.shapr3d.com/t/i-can-t-get-everything-to-line-up/8019/1 "2020-06-17T08:06:49Z")

</div>

I can’t get all of the boards on this box I’m designing to line up. My pieces are the right size but they snap when moving and won’t line up.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/94bda913aa43e628185e3e35c370d63275e56075.jpeg)

---

<div class="post-metadata">

### Author: ![Victor\_Shapr3D](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/victor_shapr3d/32/3502_2.png) [@Victor\_Shapr3D](https://discourse.shapr3d.com/u/Victor_Shapr3D)
#### Post date: [June 17, 2020, 9:20am UTC](https://discourse.shapr3d.com/t/i-can-t-get-everything-to-line-up/8019/2 "2020-06-17T09:20:35Z")

</div>

Hi, we will like to take a look. Please send the workpace in Shapr format to [support@shapr3d.com](mailto:support@shapr3d.com).  
We will investigate the issue and then get back to you as soon as possible.

---

<div class="post-metadata">

### Author: ![Learner\_2](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/learner_2/32/6265_2.png) [@Learner\_2](https://discourse.shapr3d.com/u/Learner_2)
#### Post date: [June 17, 2020, 11:30am UTC](https://discourse.shapr3d.com/t/i-can-t-get-everything-to-line-up/8019/3 "2020-06-17T11:30:43Z")

</div>

why when a plane is in the middle of a subtract it causes a cut to the plane even though there is no geometry on it

---

<div class="post-metadata">

### Author: ![Lukegxi](https://avatars.discourse-cdn.com/v4/letter/l/ac8455/32.png) [@Lukegxi](https://discourse.shapr3d.com/u/Lukegxi)
#### Post date: [June 17, 2020, 4:51pm UTC](https://discourse.shapr3d.com/t/i-can-t-get-everything-to-line-up/8019/4 "2020-06-17T16:51:43Z")

</div>

I can’t because I’m not pro. I’m trying this it trying to decide to buy. It’s expensive but if I can figure this out I’ll buy it