# Ignition timing cover

**URL:** <https://discourse.shapr3d.com/t/ignition-timing-cover/12491>\
**Category:** Share your creations\
**Created:** [April 27, 2021, 3:54am UTC](https://discourse.shapr3d.com/t/ignition-timing-cover/12491 "2021-04-27T03:54:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![NathanD](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@NathanD](https://discourse.shapr3d.com/u/NathanD)\
**Post date:** [April 27, 2021, 3:54am UTC](https://discourse.shapr3d.com/t/ignition-timing-cover/12491/1 "2021-04-27T03:54:38Z")

</div>

I wanted to design and machine a new ignition cover for my motorcycle, but manually machine it using the dimension drawings created in Shapr.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/3fd093b514457ffbba78ae20e73c39fe8e3e08f8.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f925a266e94129fb93d788b61a27ebb46b10b76f.jpeg)

Then I rendered it in Cadmio.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/262694967ac594d0d93219436e78d7d9f1ebc03b.jpeg)

Then machined it.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/4/49b3791b9602c96decd5e78dccc5e4b1c0eda7fb.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/27b3d16d6cc1135bea7edd967daccf631a3b1a8b.jpeg)

And finally, polished it.

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/2/221278db2543172406d12cd609ae95a8e9ba6378.jpeg)

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/6/6a2ed24cdf3cb661dbc0bafb77a8f4da66756454.jpeg)

The dimensioned drawings worked great, I just had to keep referencing the model for some dimensions because the drawings do not go to three decimal places for imperial measurements.  
I really hope that changes soon.

---

<div class="post-metadata">

**Author:** ![Rohan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/rohan/32/15410_2.png) [@Rohan](https://discourse.shapr3d.com/u/Rohan)\
**Post date:** [April 27, 2021, 7:22am UTC](https://discourse.shapr3d.com/t/ignition-timing-cover/12491/2 "2021-04-27T07:22:45Z")

</div>

Amazing !!