# Im trying to make threads box

**URL:** <https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744>\
**Category:** Modeling Questions\
**Created:** [November 3, 2025, 5:16pm UTC](https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744 "2025-11-03T17:16:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Reefly](https://avatars.discourse-cdn.com/v4/letter/r/e99b99/32.png) [@Reefly](https://discourse.shapr3d.com/u/Reefly)\
**Post date:** [November 3, 2025, 5:16pm UTC](https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744/1 "2025-11-03T17:16:00Z")

</div>

Hi everyone,  
I’m new to 3D printing and design, but I’m eager to learn. I’m trying to figure out where I can find good information and tutorials on how to create something similar to the box in the pictures.

First of all, how do I make threads like these, and how can I add knurling like that?

 ![1](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/f/3/f3a7a525617f2336410cfb5d603e1b2b4cb2ff5b.jpeg)

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 3, 2025, 5:21pm UTC](https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744/2 "2025-11-03T17:21:16Z")

</div>

Search forum tool. Been asked and answered here before and several good threads about it. Even on knurling the lid.

Search tool is your friend.

---

<div class="post-metadata">

**Author:** ![Reefly](https://avatars.discourse-cdn.com/v4/letter/r/e99b99/32.png) [@Reefly](https://discourse.shapr3d.com/u/Reefly)\
**Post date:** [November 3, 2025, 5:23pm UTC](https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744/3 "2025-11-03T17:23:57Z")

</div>

Thanks for the reply, im brand new to this so i guess i have to learn this 🙂

I will try to find a old topic of this 🙂

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 3, 2025, 5:43pm UTC](https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744/4 "2025-11-03T17:43:56Z")

</div>

It’s actually not too hard. Tiger mike and others made really great videos on this kind of stuff. It’s well worth the search

---

<div class="post-metadata">

**Author:** ![Oregonerd](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/oregonerd/32/8012_2.png) [@Oregonerd](https://discourse.shapr3d.com/u/Oregonerd)\
**Post date:** [November 3, 2025, 5:50pm UTC](https://discourse.shapr3d.com/t/im-trying-to-make-threads-box/39744/5 "2025-11-03T17:50:34Z")

</div>

Here is one from Tiger Mike I dug by searching the forum here. [https://www.youtube.com/watch?v=ilKd-ROMeSo&t=13s](https://www.youtube.com/watch?v=ilKd-ROMeSo&t=13s)