# Image Import

**URL:** https://discourse.shapr3d.com/t/image-import/27577
**Category:** Modeling Questions
**Created:** [August 28, 2023, 2:57pm UTC](https://discourse.shapr3d.com/t/image-import/27577 "2023-08-28T14:57:50Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Madnamie](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@Madnamie](https://discourse.shapr3d.com/u/Madnamie)
#### Post date: [August 28, 2023, 2:57pm UTC](https://discourse.shapr3d.com/t/image-import/27577/1 "2023-08-28T14:57:50Z")

</div>

Hi all. I imported a drawing on A4 paper. The size of an A4 paper is 296mm x 210mm. When i enter the size 296 for the hight the width autmaticaly adjust to 214.918. If inchange that to 210 then the hight automaticaly goes to another value. How can i get it width 210 and hight 296?

 ![IMG_3049](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/d/e/de69ee5106d2cebaefb9beeb2b8d6a82229604b0.jpeg)

---

<div class="post-metadata">

### Author: ![PEC](https://avatars.discourse-cdn.com/v4/letter/p/67e7ee/32.png) [@PEC](https://discourse.shapr3d.com/u/PEC)
#### Post date: [August 29, 2023, 11:04am UTC](https://discourse.shapr3d.com/t/image-import/27577/2 "2023-08-29T11:04:06Z")

</div>

Hi,

you can use _scale_ in _non uniform mode_ on the _transform_ menu, to achieve this.

1/ sketch a rectangle of the target size  
2/ move the image so the bottom left corner is located to the bottom left corner of the rectangle  
3/ use _scale_ in _non uniform mode_, to adjust independently width and height

Short video to show it.

[https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/a/2acad1fcb51066eca3208030040c4c08c6ec56d9.mp4](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/2/a/2acad1fcb51066eca3208030040c4c08c6ec56d9.mp4)