# Is there any update to this insane performance degradation
**URL:** https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816
**Category:** Modeling Questions
**Created:** [May 10, 2024, 3:23am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816 "2024-05-10T03:23:56Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@O24](https://discourse.shapr3d.com/u/O24)
#### Post date: [May 10, 2024, 3:23am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/1 "2024-05-10T03:23:56Z")
I want to say this as politely as possible, But I’m genuinely going crazy with this new update, man I don’t care about the workflow changes or nothing but the performance degradation is too much for me to work normally for long periods of time now.
I have a video attached down below
https://www.loom.com/embed/3fd4fe4d80644569a6ec5107dc038c46
This is after I let my iPad cool down. It was even worse before. It takes seconds for things to register when I use my pencil. I’m getting very tired of it. Sketching should not be this slow at all, it is also not just sketching
I’m literally losing battery while charging, I’ve never ever seen this before
I also didn’t even know this message existed on an iPad
Is there absolutely no way for me to roll back? I am very desperate at this point, it takes me minutes to load and upload my files now compared to the seconds it used to take, and I noticed things don’t run in the background anymore so I literally have to sit there and wait for things to finish
---
### Author:  [@Do.B](https://discourse.shapr3d.com/u/Do.B)
#### Post date: [May 10, 2024, 5:01am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/2 "2024-05-10T05:01:58Z")
> [@Terrible performances lately](https://discourse.shapr3d.com/t/terrible-performances-lately/31777):
>
> I’ve been encountering a recurring issue, particularly with sketches. After isolating an element and starting a sketch, the performance takes a nosedive. Sometimes, it’s extremely challenging to precisely target a point. I suspect this slowdown is due to the size of my assembly, which currently stands at around 2500. However, I don’t recall experiencing such significant sluggishness before the latest big update. What are my options for addressing this issue? Please, I’m in desperate need of a …
---
### Author:  [@gpahome](https://discourse.shapr3d.com/u/gpahome)
#### Post date: [May 10, 2024, 6:02am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/3 "2024-05-10T06:02:00Z")
Export your file to X \_T format then reimport to a new file.
If you have sketches you want to keep export them separately to dxf and reimport.
You will see big improvement.
---
### Author:  [@APDesignMachine](https://discourse.shapr3d.com/u/APDesignMachine)
#### Post date: [May 10, 2024, 6:05am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/4 "2024-05-10T06:05:20Z")
Currently this is the only workaround. If it doesn’t work then the only option is to send the file to shapr directly and see what they have to say.
---
### Author:  [@Istvan](https://discourse.shapr3d.com/u/Istvan)
#### Post date: [May 10, 2024, 9:25am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/5 "2024-05-10T09:25:50Z")
I’m sorry to hear that you are experiencing performance degradation. Can you confidentially share the design in which this happens?
---
### Author:  [@O24](https://discourse.shapr3d.com/u/O24)
#### Post date: [May 10, 2024, 8:30pm UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/6 "2024-05-10T20:30:23Z")
How can I do that? Can I send you a DM with a link or something?
---
### Author:  [@Istvan](https://discourse.shapr3d.com/u/Istvan)
#### Post date: [May 10, 2024, 8:32pm UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/7 "2024-05-10T20:32:50Z")
Sure, that works.
---
### Author:  [@O24](https://discourse.shapr3d.com/u/O24)
#### Post date: [May 10, 2024, 8:45pm UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/8 "2024-05-10T20:45:45Z")
I know, but unfortunately, I have a lot of materials inside of the project and I want that to carryover as well
---
### Author:  [@Istvan](https://discourse.shapr3d.com/u/Istvan)
#### Post date: [May 10, 2024, 8:55pm UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/9 "2024-05-10T20:55:24Z")
Thank you, we’ve managed to reproduce the issue. It’s unfortunately the same problem as with many other large (multi-thousand parts) assemblies. We are working on a fix already.
---
### Author:  [@O24](https://discourse.shapr3d.com/u/O24)
#### Post date: [May 10, 2024, 10:19pm UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/10 "2024-05-10T22:19:13Z")
That is good to hear, But I think it would be helpful to mention that if you open that project on a PC/Mac then back on the iPad, the iPad will crash while loading up the file I think this is because of the “back up auto generated” folder Basically doubles the body amount.
And while typing this
For some reason shapr3d Just decided to delete and Randomly reposition a bunch of Bodies out of nowhere, I’m not sure why, All I did was Load back up the file on my Computer after shapr3d crashed on my iPad a couple times. Thank God I have the back up, I just sent you. This happened on the windows version
---
### Author:  [@Rita](https://discourse.shapr3d.com/u/Rita)
#### Post date: [May 14, 2024, 7:04am UTC](https://discourse.shapr3d.com/t/is-there-any-update-to-this-insane-performance-degradation/31816/11 "2024-05-14T07:04:11Z")
Can you please share your [device specs](https://support.shapr3d.com/hc/en-us/articles/11016409716892-Find-hardware-and-software-specifications) with us in a [support ticket](https://support.shapr3d.com/hc/en-us/articles/11016409716892-Find-hardware-and-software-specifications)? Thanks in advance.