# Issue related to Loft

**URL:** <https://discourse.shapr3d.com/t/issue-related-to-loft/28998>\
**Category:** Modeling Questions\
**Created:** [November 20, 2023, 2:24pm UTC](https://discourse.shapr3d.com/t/issue-related-to-loft/28998 "2023-11-20T14:24:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Umair](https://avatars.discourse-cdn.com/v4/letter/u/e495f1/32.png) [@Umair](https://discourse.shapr3d.com/u/Umair)\
**Post date:** [November 20, 2023, 2:24pm UTC](https://discourse.shapr3d.com/t/issue-related-to-loft/28998/1 "2023-11-20T14:24:44Z")

</div>

![Issue.PNG](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/0/5/05a62da2329ebd98724b64af1c2005358b6ea0b5.jpeg)

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [November 20, 2023, 3:36pm UTC](https://discourse.shapr3d.com/t/issue-related-to-loft/28998/2 "2023-11-20T15:36:49Z")

</div>

Seems to work just fine, assuming this is what you intend.

---

<div class="post-metadata">

**Author:** ![Umair](https://avatars.discourse-cdn.com/v4/letter/u/e495f1/32.png) [@Umair](https://discourse.shapr3d.com/u/Umair)\
**Post date:** [November 20, 2023, 8:25pm UTC](https://discourse.shapr3d.com/t/issue-related-to-loft/28998/3 "2023-11-20T20:25:06Z")

</div>

Actually I’m trying to loft it but it says “Operation failed because the resulting body would not be valid”. So can you help me out here? What could be the issue?

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [November 20, 2023, 8:44pm UTC](https://discourse.shapr3d.com/t/issue-related-to-loft/28998/4 "2023-11-20T20:44:47Z")

</div>

Most likely the issus is with the connection of the guide lines. Make sure the areas circled in red are connected properly to the front and rear sketch. The bright blue lines are the gulde lines.

 ![loft sketch](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/9/f/9f7ea3a7a3b262cde1b2f974ca6c0c8b2636d49c.jpeg)