# Left handed use of Isolate mode

**URL:** https://discourse.shapr3d.com/t/left-handed-use-of-isolate-mode/20866
**Category:** Modeling Questions
**Created:** [August 11, 2022, 5:40pm UTC](https://discourse.shapr3d.com/t/left-handed-use-of-isolate-mode/20866 "2022-08-11T17:40:19Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![GREGM](https://avatars.discourse-cdn.com/v4/letter/g/bc79bd/32.png) [@GREGM](https://discourse.shapr3d.com/u/GREGM)
#### Post date: [August 11, 2022, 5:40pm UTC](https://discourse.shapr3d.com/t/left-handed-use-of-isolate-mode/20866/1 "2022-08-11T17:40:19Z")

</div>

I’m a leftie and use Shapr3D with a left handed interface. Isolate controls (body, faces, edges, etc) show up on the left side of the interface which is super awkward to get to with my right finger.

Hope this can be fixed.

Thanks

Greg

---

<div class="post-metadata">

### Author: ![Karim](https://avatars.discourse-cdn.com/v4/letter/k/46a35a/32.png) [@Karim](https://discourse.shapr3d.com/u/Karim)
#### Post date: [August 11, 2022, 5:44pm UTC](https://discourse.shapr3d.com/t/left-handed-use-of-isolate-mode/20866/2 "2022-08-11T17:44:20Z")

</div>

Go into settings and change interface to right or left.

---

<div class="post-metadata">

### Author: ![GREGM](https://avatars.discourse-cdn.com/v4/letter/g/bc79bd/32.png) [@GREGM](https://discourse.shapr3d.com/u/GREGM)
#### Post date: [August 11, 2022, 6:29pm UTC](https://discourse.shapr3d.com/t/left-handed-use-of-isolate-mode/20866/3 "2022-08-11T18:29:10Z")

</div>

It switches upon change in settings; it’s just that it is backwards. A left handed person would want the controls on the right if they are holding pencil in left hand and want to press the selection options with right index finger

Thanks

Greg