# Line / points

**URL:** <https://discourse.shapr3d.com/t/line-points/1871>\
**Category:** Modeling Questions\
**Created:** [December 19, 2017, 4:36am UTC](https://discourse.shapr3d.com/t/line-points/1871 "2017-12-19T04:36:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lue](https://avatars.discourse-cdn.com/v4/letter/l/c5a1d2/32.png) [@Lue](https://discourse.shapr3d.com/u/Lue)\
**Post date:** [December 19, 2017, 4:36am UTC](https://discourse.shapr3d.com/t/line-points/1871/1 "2017-12-19T04:36:30Z")

</div>

For example: 2cm straight line  
If I draw 1cm and another 1cm, I have a midpoint for this line. Then I make another line from midpoint.  
Here is the problem. When I zoom in, I find two points instead of one @midpoint. This is not about midpoint. Is this fixable?

![image](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex002/uploads/shapr3d/original/2X/2/2a99246c74f92245eca38918853ec7f3994fed8b.jpg)

---

<div class="post-metadata">

**Author:** ![DanielR](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/danielr/32/582_2.png) [@DanielR](https://discourse.shapr3d.com/u/DanielR)\
**Post date:** [December 19, 2017, 9:38am UTC](https://discourse.shapr3d.com/t/line-points/1871/2 "2017-12-19T09:38:05Z")

</div>

Would you be able to send a video to [support@shapr3d.com](mailto:support@shapr3d.com) or upload it here.

Points should snap to each other.

Also, the app automatically finds the midpoints and snaps to it:

- draw a 2 cm line
- draw another line, and snap it to it’s midpoints (you will notice it snaps, it will work like a magnet around the midpoint)
- constraint your sketch as you’d like (perpendicular, lock, etc.)

Here is an article on snapping: [https://support.shapr3d.com/hc/en-us/articles/115001419134-Snapping-](https://support.shapr3d.com/hc/en-us/articles/115001419134-Snapping-)