# Lines

**URL:** https://discourse.shapr3d.com/t/lines/8442
**Category:** Share your creations
**Created:** [July 25, 2020, 10:04am UTC](https://discourse.shapr3d.com/t/lines/8442 "2020-07-25T10:04:44Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![Jim1](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@Jim1](https://discourse.shapr3d.com/u/Jim1)
#### Post date: [July 25, 2020, 10:04am UTC](https://discourse.shapr3d.com/t/lines/8442/1 "2020-07-25T10:04:44Z")

</div>

Hi I love Shapr3D, but is there any way you can make 3D lines a little finer? Ie, on chamfered and rounded edges??  
Still learning by the way… 😇

 ![image](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/f/f58497e64bfa79703a29a43e81436f565be14489.png)

---

<div class="post-metadata">

### Author: ![McD](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mcd/32/15504_2.png) [@McD](https://discourse.shapr3d.com/u/McD)
#### Post date: [July 25, 2020, 2:14pm UTC](https://discourse.shapr3d.com/t/lines/8442/2 "2020-07-25T14:14:17Z")

</div>

Jim, in the image mode, you can turn off all the lines. It’s one of the buttons left of the capture button. Does this help?

---

<div class="post-metadata">

### Author: ![Jim1](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@Jim1](https://discourse.shapr3d.com/u/Jim1)
#### Post date: [July 25, 2020, 4:45pm UTC](https://discourse.shapr3d.com/t/lines/8442/3 "2020-07-25T16:45:33Z")

</div>

Hi yes I have, but then the edges look to soft.  
Cheers.

---

<div class="post-metadata">

### Author: ![McD](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/mcd/32/15504_2.png) [@McD](https://discourse.shapr3d.com/u/McD)
#### Post date: [July 25, 2020, 5:03pm UTC](https://discourse.shapr3d.com/t/lines/8442/4 "2020-07-25T17:03:15Z")

</div>

Jim, I understand the too soft look. I’m not aware of how to soften the “intra” lines, but it is a good suggestion.

---

<div class="post-metadata">

### Author: ![raycyr](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/raycyr/32/17570_2.png) [@raycyr](https://discourse.shapr3d.com/u/raycyr)
#### Post date: [July 30, 2020, 6:53pm UTC](https://discourse.shapr3d.com/t/lines/8442/5 "2020-07-30T18:53:07Z")

</div>

What you can do, if you have a photo editing software (like Photoshop) Do a capture with edges and the same one without edges. Overlay both images on separate layer and put the image with edge on the top layer. Then, adjust the opacity of the top layer until you reach the desire result.

 ![edge](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/37e70974109659043a5a9e0ae251f42263a487ac.jpeg) ![noedge copy](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/9/904fa43d77ced9c1c2366c22074efc24ac5fe954.jpeg) ![result copy](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/0/0dea5fb38e43db67e552ed3cd00285e08f09bf34.jpeg)

---

<div class="post-metadata">

### Author: ![Jim1](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@Jim1](https://discourse.shapr3d.com/u/Jim1)
#### Post date: [August 3, 2020, 6:25pm UTC](https://discourse.shapr3d.com/t/lines/8442/6 "2020-08-03T18:25:44Z")

</div>

Nice, but I’m not using photoshop or planning to