# Literally not a clue

**URL:** <https://discourse.shapr3d.com/t/literally-not-a-clue/28183>\
**Category:** Modeling Questions\
**Created:** [September 29, 2023, 5:08am UTC](https://discourse.shapr3d.com/t/literally-not-a-clue/28183 "2023-09-29T05:08:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lucas1](https://avatars.discourse-cdn.com/v4/letter/l/c67d28/32.png) [@Lucas1](https://discourse.shapr3d.com/u/Lucas1)\
**Post date:** [September 29, 2023, 5:08am UTC](https://discourse.shapr3d.com/t/literally-not-a-clue/28183/1 "2023-09-29T05:08:42Z")

</div>

Edge seems to somehow be “detached”, don’t know why or when this occurred.

Any advice on what’s going on here would be greatly appreciated, thanks

 ![IMG_9178](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/1/e/1e4d261d16c29eead792cfd081dd649b2dd5dfe0.jpeg)  
 ![IMG_9179](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/6/56b99f1dcbb41c6dfa549f3c7adcf87885241cb9.jpeg)

---

<div class="post-metadata">

**Author:** ![Cjacob](https://avatars.discourse-cdn.com/v4/letter/c/51bf81/32.png) [@Cjacob](https://discourse.shapr3d.com/u/Cjacob)\
**Post date:** [September 29, 2023, 11:01pm UTC](https://discourse.shapr3d.com/t/literally-not-a-clue/28183/2 "2023-09-29T23:01:31Z")

</div>

Hello Lucas1,

Yes have seen this as well. Try going on the inside and look outwards, see if the "splits"are still showing up.

I don’t find it to be a problem as it doesn’t surface on “print”.

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [September 29, 2023, 11:31pm UTC](https://discourse.shapr3d.com/t/literally-not-a-clue/28183/3 "2023-09-29T23:31:02Z")

</div>

Can you upload a couple more pics zoomed out so we can see the entire surface(s)?  
In some cases, Replace Face can work.

---

<div class="post-metadata">

**Author:** ![Lucas1](https://avatars.discourse-cdn.com/v4/letter/l/c67d28/32.png) [@Lucas1](https://discourse.shapr3d.com/u/Lucas1)\
**Post date:** [October 1, 2023, 6:18am UTC](https://discourse.shapr3d.com/t/literally-not-a-clue/28183/4 "2023-10-01T06:18:43Z")

</div>

![IMG_9190](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/8/f/8f2d7cc0d65ffaeee324aac89d12b41a8191310d.jpeg)

The highlighted edge is the one causing issues, I really wish there was away to “stitch” two edges together like in Maya, that way issues like this could be fixed easily, ah well.

I did try the replace face tool, thanks for the suggestion though it didn’t work.

---

<div class="post-metadata">

**Author:** ![JST](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@JST](https://discourse.shapr3d.com/u/JST)\
**Post date:** [October 1, 2023, 6:47am UTC](https://discourse.shapr3d.com/t/literally-not-a-clue/28183/5 "2023-10-01T06:47:03Z")

</div>

In the past I had a similar error with the loft tool on the rounded edges.  
The S3D guys told me, it was a tessellation error.  
If it is really the error described previously, it does not cause a problem.  
For sure, ask for a support ticket.