# Loft and Sweep together!

**URL:** <https://discourse.shapr3d.com/t/loft-and-sweep-together/28848>\
**Category:** Modeling Questions\
**Created:** [November 10, 2023, 8:57am UTC](https://discourse.shapr3d.com/t/loft-and-sweep-together/28848 "2023-11-10T08:57:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![selman](https://avatars.discourse-cdn.com/v4/letter/s/fbc32d/32.png) [@selman](https://discourse.shapr3d.com/u/selman)\
**Post date:** [November 10, 2023, 8:57am UTC](https://discourse.shapr3d.com/t/loft-and-sweep-together/28848/1 "2023-11-10T08:57:06Z")

</div>

Hi. Here is my new problem. Please help.

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [November 10, 2023, 3:42pm UTC](https://discourse.shapr3d.com/t/loft-and-sweep-together/28848/2 "2023-11-10T15:42:50Z")

</div>

Sweep uses a source sketch (or face) and a path. You have a source sketch and a destination sketch. Use Loft. Change your sketches from this-

 ![loft1](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/5/2/52029b6b38c297e496380e5a661113258505d2d7.jpeg)  
To this-  
 ![loft2](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/3X/b/9/b906689ece8dd749432abcb6d169631412b5745d.jpeg)  
And make sure the guide curves connect to the sketch corners correctly.

---

<div class="post-metadata">

**Author:** ![TigerMike](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/tigermike/32/32650_2.png) [@TigerMike](https://discourse.shapr3d.com/u/TigerMike)\
**Post date:** [November 10, 2023, 4:07pm UTC](https://discourse.shapr3d.com/t/loft-and-sweep-together/28848/3 "2023-11-10T16:07:10Z")

</div>



---

<div class="post-metadata">

**Author:** ![selman](https://avatars.discourse-cdn.com/v4/letter/s/fbc32d/32.png) [@selman](https://discourse.shapr3d.com/u/selman)\
**Post date:** [November 11, 2023, 6:21pm UTC](https://discourse.shapr3d.com/t/loft-and-sweep-together/28848/4 "2023-11-11T18:21:43Z")

</div>

Thank you so much.