# Loft at sketches snap on

**URL:** <https://discourse.shapr3d.com/t/loft-at-sketches-snap-on/14587>\
**Category:** Modeling Questions\
**Created:** [August 25, 2021, 9:53am UTC](https://discourse.shapr3d.com/t/loft-at-sketches-snap-on/14587 "2021-08-25T09:53:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CADesigner](https://avatars.discourse-cdn.com/v4/letter/c/91b2a8/32.png) [@CADesigner](https://discourse.shapr3d.com/u/CADesigner)\
**Post date:** [August 25, 2021, 9:53am UTC](https://discourse.shapr3d.com/t/loft-at-sketches-snap-on/14587/1 "2021-08-25T09:53:49Z")

</div>

hi

Is it possible to attach the control points to a sketch in the loft tool.  
This way my shape would certainly become symmetrical.

thanks

 ![IMG_3972.PNG](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/b/b4aacd3bf269749cfa341d90379a4960e33ca32f.jpeg)  
 ![IMG_3973.PNG](https://us1.discourse-cdn.com/flex002/uploads/shapr3d/original/2X/3/3c1736135428b2a574e4a8530a586dd98303f38b.jpeg)

---

<div class="post-metadata">

**Author:** ![KPeter](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/kpeter/32/7644_2.png) [@KPeter](https://discourse.shapr3d.com/u/KPeter)\
**Post date:** [August 25, 2021, 3:33pm UTC](https://discourse.shapr3d.com/t/loft-at-sketches-snap-on/14587/2 "2021-08-25T15:33:07Z")

</div>

Hello! The points cannot be snapped to sketch elements, but it is possible to guide the loft tool if the cross-sections have the same number of edges. If there is no edge where one should be, you can always project a line there as an edge 🙂