# Making radius

**URL:** https://discourse.shapr3d.com/t/making-radius/1686
**Category:** Modeling Questions
**Created:** [November 12, 2017, 9:18pm UTC](https://discourse.shapr3d.com/t/making-radius/1686 "2017-11-12T21:18:51Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![basic](https://avatars.discourse-cdn.com/v4/letter/b/58956e/32.png) [@basic](https://discourse.shapr3d.com/u/basic)
#### Post date: [November 12, 2017, 9:18pm UTC](https://discourse.shapr3d.com/t/making-radius/1686/1 "2017-11-12T21:18:51Z")

</div>

Hello,  
I haven’t found this option. Is it possible to draw a square and add radius to the edges?

---

<div class="post-metadata">

### Author: ![Istvan](https://sea2.discourse-cdn.com/flex002/user_avatar/discourse.shapr3d.com/istvan/32/23668_2.png) [@Istvan](https://discourse.shapr3d.com/u/Istvan)
#### Post date: [November 12, 2017, 9:23pm UTC](https://discourse.shapr3d.com/t/making-radius/1686/2 "2017-11-12T21:23:10Z")

</div>

Nope, we don’t have sketch fillets, it wouldn’t make too much sense for a direct modeling system (since the sketches are not driving). Just fillet the edges after you extruded the sketch.

---

<div class="post-metadata">

### Author: ![basic](https://avatars.discourse-cdn.com/v4/letter/b/58956e/32.png) [@basic](https://discourse.shapr3d.com/u/basic)
#### Post date: [November 12, 2017, 9:47pm UTC](https://discourse.shapr3d.com/t/making-radius/1686/3 "2017-11-12T21:47:07Z")

</div>

Értem, köszi