# Mitring Bodies

**URL:** https://discourse.shapr3d.com/t/mitring-bodies/36911
**Category:** Modeling Questions
**Created:** [March 8, 2025, 6:09am UTC](https://discourse.shapr3d.com/t/mitring-bodies/36911 "2025-03-08T06:09:17Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![DylanB](https://avatars.discourse-cdn.com/v4/letter/d/aeb1de/32.png) [@DylanB](https://discourse.shapr3d.com/u/DylanB)
#### Post date: [March 8, 2025, 6:09am UTC](https://discourse.shapr3d.com/t/mitring-bodies/36911/1 "2025-03-08T06:09:17Z")

</div>

Hi All,

Just wondering if there is a quick way of mitering two bodies together.

I constantly create metal frames and would love to have an easy way to do so.

I have tried:

1. Creating a construction plane at 45 degrees and spliting, but need to do this for all mitire locations unless the model is a perfect square
2. Selecting one of the edges and moving it until the face is at a 45 degree angle

Im hoping there is a simple way to Miter two bodies similar to performing a boolean?

Looking forward to suggestions.

[Mitring example.shapr](https://discourse.shapr3d.com/uploads/short-url/3udxtymy1ZugbuZKuPwylPrffA8.shapr) (48.1 KB)

---

<div class="post-metadata">

### Author: ![Bob3DPO](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@Bob3DPO](https://discourse.shapr3d.com/u/Bob3DPO)
#### Post date: [March 8, 2025, 8:10pm UTC](https://discourse.shapr3d.com/t/mitring-bodies/36911/2 "2025-03-08T20:10:27Z")

</div>

Hi Dylan,  
Another way would be to chamfer by the same amount as the width, 100mm in your example.

---

<div class="post-metadata">

### Author: ![DylanB](https://avatars.discourse-cdn.com/v4/letter/d/aeb1de/32.png) [@DylanB](https://discourse.shapr3d.com/u/DylanB)
#### Post date: [March 8, 2025, 10:01pm UTC](https://discourse.shapr3d.com/t/mitring-bodies/36911/3 "2025-03-08T22:01:45Z")

</div>

Thanks heaps Bob!